Komatsu LOCK 23D-54-33261 LOCK ASS'Y 195-979-1491 LOCK	Type:Bearings with Housin; Shape:T-Shaped; C Chamfered:Not Provided; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6205; Seals:VV (Non-Contact Rubb; Height H(mm):40 ～ 80; Days to Ship:8 Days;
Komatsu LOCK 56D-54-31780 LOCK 795-799-1950 LOCK	r - Cup Backface To Clear Radius1:0.06 in; Design Units:Imperial; Cg - Geometry Factor:0.17; Db - Cup Backface Backing Diameter:6.93 in; e - ISO Factor2:0.36; Cup Part Number:LM328410; Series:LM328400; D:7.3750 in; Da - Cup Frontface Backing Diameter:7.20 in; C - Cup Width:0.9063 in;
Komatsu LOCK 195-Z11-1430 LOCK 425-S14-4360 LOCK	Type:Bearings with Housin; Shape:T-Shaped; C Chamfered:Not Provided; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6205; Seals:VV (Non-Contact Rubb; Height H(mm):40 ～ 80; Days to Ship:8 Days;
Komatsu LOCK 22M-60-31500 LOCK ASS'Y 22M-60-31500 LOCK ASS'Y	ra max:1 mm; Category:Precision Ball Beari; Fatigue limit load, Cu:0.51 kN; Enclosure Type:Contact Seal; Characteristic inner ring frequency, BPFI:5.42 Hz; Harmonized Tariff Code:8482.10.50.68; rs min:1 mm; Preload:None; Enclosure:1 Seal; Contact Angle:0 Degree;
Komatsu LOCK 13Y-54-21270 LOCK 421-54-H1A20 LOCK	B:34 mm; A:18 mm; C:12.8 kN; Designation of housing:FCE204-; d1:32.4 mm; A2:28.5 mm; Recommended tightening torque for set screw:5.5 Nm; S:17 mm; H3:62; s1:30.5 mm;
Komatsu LOCK 201-54-81890CQ LOCK 17A-71-45490 LOCK	T max.:200 °C; d:60.32 mm; H:69.8 mm; N:M16; T min.:-20 °C; G:M6x1; L:150 mm; C:52.5 kN; A1:40 mm; Designation of open end cover:SCOU212-38;
Komatsu LOCK 23A-952-1812 LOCK 09460-00009 LOCK	B:34 mm; A:18 mm; C:12.8 kN; Designation of housing:FCE204-; d1:32.4 mm; A2:28.5 mm; Recommended tightening torque for set screw:5.5 Nm; S:17 mm; H3:62; s1:30.5 mm;
Komatsu LOCK 20Y-54-84970 LOCK 562-22-11150 LOCK	T max.:200 °C; d:60.32 mm; H:69.8 mm; N:M16; T min.:-20 °C; G:M6x1; L:150 mm; C:52.5 kN; A1:40 mm; Designation of open end cover:SCOU212-38;