Komatsu round 131-30-00332E round	Nref:16,000 rpm; Db max:42.5 mm; Brand:SNR; db min:25.5 mm; d1:30.5 mm; Characteristic inner ring frequency, BPFI:6.5 Hz; D2:43.2 mm; D:47 mm; B:14 mm; r1s min:0.6 mm;
Komatsu round 6215-61-3802 round	Precision:Class 0; D:24; Outer Ring Shape:Standard; Seal Part Structure:Double Shielded; Load Direction:Radial; Width B (or T)(mm):8; Size Standards:Metric Series; Type:Ball;
Komatsu round 17M-30-00261 round	Precision:Class 0; D:24; Outer Ring Shape:Standard; Seal Part Structure:Double Shielded; Load Direction:Radial; Width B (or T)(mm):8; Size Standards:Metric Series; Type:Ball;
Komatsu round ZZ9247454TS round	Series:29500; Ab - Cage-Cone Frontface Clearance:0.08 in; Cone Part Number:29585; G2 - Heat Generation Factor (Rib-Roller End):25.8; C90 - Dynamic Radial Rating (90 million revolutions)5:7610 lbf; C0 - Static Radial Rating:36300 lbf; B - Cone Width:1.0000 in; C1 - Dynamic Radial Rating (1 million revolutions)6:29400 lbf; Cg - Geometry Factor:0.111; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:13200 lbf;
Komatsu round 6271-31-1490 round	Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Number of Bearings:Single; Flange O.D. H(φ):81; Type:Bearings with Housin;
Komatsu round 6211-62-3150 round	Nref:16,000 rpm; Db max:42.5 mm; Brand:SNR; db min:25.5 mm; d1:30.5 mm; Characteristic inner ring frequency, BPFI:6.5 Hz; D2:43.2 mm; D:47 mm; B:14 mm; r1s min:0.6 mm;
Komatsu round 6166-61-3210 round	B - Cone Width:26.000 mm; Y - ISO Factor9:1.49; e - ISO Factor8:0.4; Cg - Geometry Factor:0.0925; C1 - Dynamic Radial Rating (1 million revolutions)5:109000 N; Cone Part Number:JLM506848E; Cage Type:Stamped Steel; C0 - Static Radial Rating:123000 N; Ab - Cage-Cone Frontface Clearance:-1 mm; Aa - Cage-Cone Backface Clearance:0.5 mm;
Komatsu round 6207-61-3860 round	T min.:-40 °C; H1:11 mm; C0:4.78 kN; Designation of open end cover:SCOE201-12; Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:ES201G2T04; N1:14 mm; d1:27.2 mm; C:9.55 kN; Dz:46 mm;