Komatsu round 232-43-12120 round	Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Number of Bearings:Single; Flange O.D. H(φ):81; Type:Bearings with Housin;
Komatsu round ZZ20Y3000030TS round	T min.:-40 °C; H1:11 mm; C0:4.78 kN; Designation of open end cover:SCOE201-12; Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:ES201G2T04; N1:14 mm; d1:27.2 mm; C:9.55 kN; Dz:46 mm;
Komatsu round 6162-35-5340 round	N1:21 mm; Recommended tightening torque for set screw:8 Nm; A1:27 mm; T min.:-20 °C; B:42.9 mm; Designation of housing:PE207N-; A:45 mm; H1:19 mm; Designation of bearing:UC207-20G2T20; N:14mm;
Komatsu round 23B-70-16150 round	Weight / Kilogram:1.291; b min:2.7 mm; D4 max:116.6 mm; Ca max:5.74 mm; Characteristic inner ring frequency, BPFI:7.78 Hz; rs min:2 mm; Max operating temperature, Tmax:120 °C; Product Group:B04144; Fatigue limit load, Cu:13.8 kN; rNa max:0.5 mm;
Komatsu round 22J-30-15700 round	Series:29500; Ab - Cage-Cone Frontface Clearance:0.08 in; Cone Part Number:29585; G2 - Heat Generation Factor (Rib-Roller End):25.8; C90 - Dynamic Radial Rating (90 million revolutions)5:7610 lbf; C0 - Static Radial Rating:36300 lbf; B - Cone Width:1.0000 in; C1 - Dynamic Radial Rating (1 million revolutions)6:29400 lbf; Cg - Geometry Factor:0.111; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:13200 lbf;
Komatsu round 101-30-00170 round	Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days; Shape:Flanged Pilot Type; Holder Surface Treatment:Clear Anodize; Type:Bearings with Housin; Volume Discount:Available; Bearing Material:Stainless Steel; Seals:ZZ (Double Shield);
Komatsu round 711-61-12160 round	Weight / Kilogram:1.291; b min:2.7 mm; D4 max:116.6 mm; Ca max:5.74 mm; Characteristic inner ring frequency, BPFI:7.78 Hz; rs min:2 mm; Max operating temperature, Tmax:120 °C; Product Group:B04144; Fatigue limit load, Cu:13.8 kN; rNa max:0.5 mm;
Komatsu round 195-30-00811 round	T min.:-40 °C; H1:11 mm; C0:4.78 kN; Designation of open end cover:SCOE201-12; Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:ES201G2T04; N1:14 mm; d1:27.2 mm; C:9.55 kN; Dz:46 mm;