Komatsu round 23B-70-16150 round	Weight / Kilogram:1.291; b min:2.7 mm; D4 max:116.6 mm; Ca max:5.74 mm; Characteristic inner ring frequency, BPFI:7.78 Hz; rs min:2 mm; Max operating temperature, Tmax:120 °C; Product Group:B04144; Fatigue limit load, Cu:13.8 kN; rNa max:0.5 mm;
Komatsu round 21W-27-41110 round	T min.:-40 °C; H1:11 mm; C0:4.78 kN; Designation of open end cover:SCOE201-12; Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:ES201G2T04; N1:14 mm; d1:27.2 mm; C:9.55 kN; Dz:46 mm;
Komatsu round 6215-31-1530 round	Weight / Kilogram:1.291; b min:2.7 mm; D4 max:116.6 mm; Ca max:5.74 mm; Characteristic inner ring frequency, BPFI:7.78 Hz; rs min:2 mm; Max operating temperature, Tmax:120 °C; Product Group:B04144; Fatigue limit load, Cu:13.8 kN; rNa max:0.5 mm;
Komatsu round FF7810-30401 round	A1:12 mm; J:64 mm; L:86 mm; Designation of bearing:SUC202; C0:6.8 kN; Recommended tightening torque for set screw:3.9 Nm; A:25.5 mm; e:15 mm; S:12.7 mm; s1:15.5 mm;
Komatsu round 45B-2MG-2141YUKF round	Bearing Inner Dia. Shape:Cylindrical Bore Set; Seal:Silicone; Machining:No; Rolling Element Material:Bearing Steel; Fit:J7; Basic Load Rating, Static Rating(N):15400; Grease Type:SH44M; Unit Body Material:Cast Iron;
Komatsu round KWKKS-75-53131 round	B - Cone Width:26.000 mm; Y - ISO Factor9:1.49; e - ISO Factor8:0.4; Cg - Geometry Factor:0.0925; C1 - Dynamic Radial Rating (1 million revolutions)5:109000 N; Cone Part Number:JLM506848E; Cage Type:Stamped Steel; C0 - Static Radial Rating:123000 N; Ab - Cage-Cone Frontface Clearance:-1 mm; Aa - Cage-Cone Backface Clearance:0.5 mm;
Komatsu round 6150-31-1550KF round	B - Cone Width:26.000 mm; Y - ISO Factor9:1.49; e - ISO Factor8:0.4; Cg - Geometry Factor:0.0925; C1 - Dynamic Radial Rating (1 million revolutions)5:109000 N; Cone Part Number:JLM506848E; Cage Type:Stamped Steel; C0 - Static Radial Rating:123000 N; Ab - Cage-Cone Frontface Clearance:-1 mm; Aa - Cage-Cone Backface Clearance:0.5 mm;
Komatsu round 6204-31-1430 round	N1:21 mm; Recommended tightening torque for set screw:8 Nm; A1:27 mm; T min.:-20 °C; B:42.9 mm; Designation of housing:PE207N-; A:45 mm; H1:19 mm; Designation of bearing:UC207-20G2T20; N:14mm;