Komatsu round 37C-1GF-3050KF round	A1:12 mm; J:64 mm; L:86 mm; Designation of bearing:SUC202; C0:6.8 kN; Recommended tightening torque for set screw:3.9 Nm; A:25.5 mm; e:15 mm; S:12.7 mm; s1:15.5 mm;
Komatsu round 6127-61-1332 round	A1:12 mm; J:64 mm; L:86 mm; Designation of bearing:SUC202; C0:6.8 kN; Recommended tightening torque for set screw:3.9 Nm; A:25.5 mm; e:15 mm; S:12.7 mm; s1:15.5 mm;
Komatsu round 711-20-12160 round	Housing Material:1045 Carbon Steel; Volume Discount:Available; Bearing Material:Steel; Shape:Flange Type; Flange Shape:Compact Type; Holder Width(inch):1-1/2; Number of Bearings:Double; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield);
Komatsu round 120-27-32213 round	Fatigue limit load, Cu:0.15 kN; Characteristic outer ring frequency, BPF0:3.14 Hz; Mass:0.04 kg; Brand:NTN; f0:13.6; da min:19 mm; D:35 mm; Radial clearance class:CN; Nlim (oil):24,000 rpm; Nlim (grease):20,000 rpm;
Komatsu round 22J-27-16111 round	B - Cone Width:26.000 mm; Y - ISO Factor9:1.49; e - ISO Factor8:0.4; Cg - Geometry Factor:0.0925; C1 - Dynamic Radial Rating (1 million revolutions)5:109000 N; Cone Part Number:JLM506848E; Cage Type:Stamped Steel; C0 - Static Radial Rating:123000 N; Ab - Cage-Cone Frontface Clearance:-1 mm; Aa - Cage-Cone Backface Clearance:0.5 mm;
Komatsu round 208-30-D1400UC round	Fatigue limit load, Cu:0.15 kN; Characteristic outer ring frequency, BPF0:3.14 Hz; Mass:0.04 kg; Brand:NTN; f0:13.6; da min:19 mm; D:35 mm; Radial clearance class:CN; Nlim (oil):24,000 rpm; Nlim (grease):20,000 rpm;
Komatsu round 195-30-00381 round	N1:21 mm; Recommended tightening torque for set screw:8 Nm; A1:27 mm; T min.:-20 °C; B:42.9 mm; Designation of housing:PE207N-; A:45 mm; H1:19 mm; Designation of bearing:UC207-20G2T20; N:14mm;
Komatsu round 21W-27-41110 round	T min.:-40 °C; H1:11 mm; C0:4.78 kN; Designation of open end cover:SCOE201-12; Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:ES201G2T04; N1:14 mm; d1:27.2 mm; C:9.55 kN; Dz:46 mm;