Komatsu round 6212-61-3670 round	Bearing Inner Dia. Shape:Cylindrical Bore Set; Seal:Silicone; Machining:No; Rolling Element Material:Bearing Steel; Fit:J7; Basic Load Rating, Static Rating(N):15400; Grease Type:SH44M; Unit Body Material:Cast Iron;
Komatsu round 6162-35-5330 round	Housing Material:1045 Carbon Steel; Volume Discount:Available; Bearing Material:Steel; Shape:Flange Type; Flange Shape:Compact Type; Holder Width(inch):1-1/2; Number of Bearings:Double; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield);
Komatsu round 6211-62-4700 round	Nref:16,000 rpm; Db max:42.5 mm; Brand:SNR; db min:25.5 mm; d1:30.5 mm; Characteristic inner ring frequency, BPFI:6.5 Hz; D2:43.2 mm; D:47 mm; B:14 mm; r1s min:0.6 mm;
Komatsu round 14X-30-00143 round	Weight / Kilogram:1.291; b min:2.7 mm; D4 max:116.6 mm; Ca max:5.74 mm; Characteristic inner ring frequency, BPFI:7.78 Hz; rs min:2 mm; Max operating temperature, Tmax:120 °C; Product Group:B04144; Fatigue limit load, Cu:13.8 kN; rNa max:0.5 mm;
Komatsu round 263-810-1180 round	Nref:16,000 rpm; Db max:42.5 mm; Brand:SNR; db min:25.5 mm; d1:30.5 mm; Characteristic inner ring frequency, BPFI:6.5 Hz; D2:43.2 mm; D:47 mm; B:14 mm; r1s min:0.6 mm;
Komatsu round 209-03-71590 round	B - Cone Width:26.000 mm; Y - ISO Factor9:1.49; e - ISO Factor8:0.4; Cg - Geometry Factor:0.0925; C1 - Dynamic Radial Rating (1 million revolutions)5:109000 N; Cone Part Number:JLM506848E; Cage Type:Stamped Steel; C0 - Static Radial Rating:123000 N; Ab - Cage-Cone Frontface Clearance:-1 mm; Aa - Cage-Cone Backface Clearance:0.5 mm;
Komatsu round 711-20-12160 round	Housing Material:1045 Carbon Steel; Volume Discount:Available; Bearing Material:Steel; Shape:Flange Type; Flange Shape:Compact Type; Holder Width(inch):1-1/2; Number of Bearings:Double; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield);
Komatsu round 6211-62-3150 round	Nref:16,000 rpm; Db max:42.5 mm; Brand:SNR; db min:25.5 mm; d1:30.5 mm; Characteristic inner ring frequency, BPFI:6.5 Hz; D2:43.2 mm; D:47 mm; B:14 mm; r1s min:0.6 mm;