Komatsu round 37B-1GW-3070KF round	N1:21 mm; Recommended tightening torque for set screw:8 Nm; A1:27 mm; T min.:-20 °C; B:42.9 mm; Designation of housing:PE207N-; A:45 mm; H1:19 mm; Designation of bearing:UC207-20G2T20; N:14mm;
Komatsu round 6166-61-3210 round	B - Cone Width:26.000 mm; Y - ISO Factor9:1.49; e - ISO Factor8:0.4; Cg - Geometry Factor:0.0925; C1 - Dynamic Radial Rating (1 million revolutions)5:109000 N; Cone Part Number:JLM506848E; Cage Type:Stamped Steel; C0 - Static Radial Rating:123000 N; Ab - Cage-Cone Frontface Clearance:-1 mm; Aa - Cage-Cone Backface Clearance:0.5 mm;
Komatsu round 3RB-27-52710KF round	N1:21 mm; Recommended tightening torque for set screw:8 Nm; A1:27 mm; T min.:-20 °C; B:42.9 mm; Designation of housing:PE207N-; A:45 mm; H1:19 mm; Designation of bearing:UC207-20G2T20; N:14mm;
Komatsu round 23B-02-31141 round	Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Number of Bearings:Single; Flange O.D. H(φ):81; Type:Bearings with Housin;
Komatsu round 20N-35-71300 round	Fatigue limit load, Cu:0.15 kN; Characteristic outer ring frequency, BPF0:3.14 Hz; Mass:0.04 kg; Brand:NTN; f0:13.6; da min:19 mm; D:35 mm; Radial clearance class:CN; Nlim (oil):24,000 rpm; Nlim (grease):20,000 rpm;
Komatsu round 547-30-11100KF round	Nref:16,000 rpm; Db max:42.5 mm; Brand:SNR; db min:25.5 mm; d1:30.5 mm; Characteristic inner ring frequency, BPFI:6.5 Hz; D2:43.2 mm; D:47 mm; B:14 mm; r1s min:0.6 mm;
Komatsu round 6211-61-4910 round	A1:12 mm; J:64 mm; L:86 mm; Designation of bearing:SUC202; C0:6.8 kN; Recommended tightening torque for set screw:3.9 Nm; A:25.5 mm; e:15 mm; S:12.7 mm; s1:15.5 mm;
Komatsu round 124-30-00133 round	A1:12 mm; J:64 mm; L:86 mm; Designation of bearing:SUC202; C0:6.8 kN; Recommended tightening torque for set screw:3.9 Nm; A:25.5 mm; e:15 mm; S:12.7 mm; s1:15.5 mm;