Komatsu round 195-30-00381 round | N1:21 mm; Recommended tightening torque for set screw:8 Nm; A1:27 mm; T min.:-20 °C; B:42.9 mm; Designation of housing:PE207N-; A:45 mm; H1:19 mm; Designation of bearing:UC207-20G2T20; N:14mm; |
Komatsu round 195-30-00811 round | B - Cone Width:26.000 mm; Y - ISO Factor9:1.49; e - ISO Factor8:0.4; Cg - Geometry Factor:0.0925; C1 - Dynamic Radial Rating (1 million revolutions)5:109000 N; Cone Part Number:JLM506848E; Cage Type:Stamped Steel; C0 - Static Radial Rating:123000 N; Ab - Cage-Cone Frontface Clearance:-1 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; |
Komatsu round 6162-35-5330 round | Series:29500; Ab - Cage-Cone Frontface Clearance:0.08 in; Cone Part Number:29585; G2 - Heat Generation Factor (Rib-Roller End):25.8; C90 - Dynamic Radial Rating (90 million revolutions)5:7610 lbf; C0 - Static Radial Rating:36300 lbf; B - Cone Width:1.0000 in; C1 - Dynamic Radial Rating (1 million revolutions)6:29400 lbf; Cg - Geometry Factor:0.111; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:13200 lbf; |
Komatsu round 209-03-61122 round | N1:21 mm; Recommended tightening torque for set screw:8 Nm; A1:27 mm; T min.:-20 °C; B:42.9 mm; Designation of housing:PE207N-; A:45 mm; H1:19 mm; Designation of bearing:UC207-20G2T20; N:14mm; |
Komatsu round 6215-61-3650 round | Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Number of Bearings:Single; Flange O.D. H(φ):81; Type:Bearings with Housin; |
Komatsu round SD2080-23300X0 round | Bearing Inner Dia. Shape:Cylindrical Bore Set; Seal:Silicone; Machining:No; Rolling Element Material:Bearing Steel; Fit:J7; Basic Load Rating, Static Rating(N):15400; Grease Type:SH44M; Unit Body Material:Cast Iron; |
Komatsu round 6212-32-1540 round | Nref:16,000 rpm; Db max:42.5 mm; Brand:SNR; db min:25.5 mm; d1:30.5 mm; Characteristic inner ring frequency, BPFI:6.5 Hz; D2:43.2 mm; D:47 mm; B:14 mm; r1s min:0.6 mm; |
Komatsu round 6151-61-3630 round | Nref:16,000 rpm; Db max:42.5 mm; Brand:SNR; db min:25.5 mm; d1:30.5 mm; Characteristic inner ring frequency, BPFI:6.5 Hz; D2:43.2 mm; D:47 mm; B:14 mm; r1s min:0.6 mm; |