Komatsu round 22J-30-15700 round	Series:29500; Ab - Cage-Cone Frontface Clearance:0.08 in; Cone Part Number:29585; G2 - Heat Generation Factor (Rib-Roller End):25.8; C90 - Dynamic Radial Rating (90 million revolutions)5:7610 lbf; C0 - Static Radial Rating:36300 lbf; B - Cone Width:1.0000 in; C1 - Dynamic Radial Rating (1 million revolutions)6:29400 lbf; Cg - Geometry Factor:0.111; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:13200 lbf;
Komatsu round 6240-41-2300 round	Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Number of Bearings:Single; Flange O.D. H(φ):81; Type:Bearings with Housin;
Komatsu round 21W-30-00022 round	Bearing Inner Dia. Shape:Cylindrical Bore Set; Seal:Silicone; Machining:No; Rolling Element Material:Bearing Steel; Fit:J7; Basic Load Rating, Static Rating(N):15400; Grease Type:SH44M; Unit Body Material:Cast Iron;
Komatsu round FF7810-30401 round	A1:12 mm; J:64 mm; L:86 mm; Designation of bearing:SUC202; C0:6.8 kN; Recommended tightening torque for set screw:3.9 Nm; A:25.5 mm; e:15 mm; S:12.7 mm; s1:15.5 mm;
Komatsu round 3BN-25-11160KF round	Fatigue limit load, Cu:0.15 kN; Characteristic outer ring frequency, BPF0:3.14 Hz; Mass:0.04 kg; Brand:NTN; f0:13.6; da min:19 mm; D:35 mm; Radial clearance class:CN; Nlim (oil):24,000 rpm; Nlim (grease):20,000 rpm;
Komatsu round KWKKS-75-51550 round	Bearing Retained:Yes (with retaining; Flange O.D. H(φ):96; Shape:Flange Type; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Seals:ZZ (Double Shield); Type:Bearings with Housin; Bearing I.D. d(mm):30;
Komatsu round KD0-33411-2850 round	Weight / Kilogram:1.291; b min:2.7 mm; D4 max:116.6 mm; Ca max:5.74 mm; Characteristic inner ring frequency, BPFI:7.78 Hz; rs min:2 mm; Max operating temperature, Tmax:120 °C; Product Group:B04144; Fatigue limit load, Cu:13.8 kN; rNa max:0.5 mm;
Komatsu round 6212-61-3670 round	Bearing Inner Dia. Shape:Cylindrical Bore Set; Seal:Silicone; Machining:No; Rolling Element Material:Bearing Steel; Fit:J7; Basic Load Rating, Static Rating(N):15400; Grease Type:SH44M; Unit Body Material:Cast Iron;