Komatsu round 23B-23-21210 round | Bearing Inner Dia. Shape:Cylindrical Bore Set; Seal:Silicone; Machining:No; Rolling Element Material:Bearing Steel; Fit:J7; Basic Load Rating, Static Rating(N):15400; Grease Type:SH44M; Unit Body Material:Cast Iron; |
Komatsu round 6151-61-3630 round | Nref:16,000 rpm; Db max:42.5 mm; Brand:SNR; db min:25.5 mm; d1:30.5 mm; Characteristic inner ring frequency, BPFI:6.5 Hz; D2:43.2 mm; D:47 mm; B:14 mm; r1s min:0.6 mm; |
Komatsu round 170-30-15115 round | B - Cone Width:26.000 mm; Y - ISO Factor9:1.49; e - ISO Factor8:0.4; Cg - Geometry Factor:0.0925; C1 - Dynamic Radial Rating (1 million revolutions)5:109000 N; Cone Part Number:JLM506848E; Cage Type:Stamped Steel; C0 - Static Radial Rating:123000 N; Ab - Cage-Cone Frontface Clearance:-1 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; |
Komatsu round 6151-61-5210 round | Precision:Class 0; D:24; Outer Ring Shape:Standard; Seal Part Structure:Double Shielded; Load Direction:Radial; Width B (or T)(mm):8; Size Standards:Metric Series; Type:Ball; |
Komatsu round ZZ9247454TS round | Fatigue limit load, Cu:0.15 kN; Characteristic outer ring frequency, BPF0:3.14 Hz; Mass:0.04 kg; Brand:NTN; f0:13.6; da min:19 mm; D:35 mm; Radial clearance class:CN; Nlim (oil):24,000 rpm; Nlim (grease):20,000 rpm; |
Komatsu round 8232-01-1142 round | A1:12 mm; J:64 mm; L:86 mm; Designation of bearing:SUC202; C0:6.8 kN; Recommended tightening torque for set screw:3.9 Nm; A:25.5 mm; e:15 mm; S:12.7 mm; s1:15.5 mm; |
Komatsu round 21T-30-00080 round | Bearing Retained:Yes (with retaining; Flange O.D. H(φ):96; Shape:Flange Type; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Seals:ZZ (Double Shield); Type:Bearings with Housin; Bearing I.D. d(mm):30; |
Komatsu round 22J-27-16111 round | B - Cone Width:26.000 mm; Y - ISO Factor9:1.49; e - ISO Factor8:0.4; Cg - Geometry Factor:0.0925; C1 - Dynamic Radial Rating (1 million revolutions)5:109000 N; Cone Part Number:JLM506848E; Cage Type:Stamped Steel; C0 - Static Radial Rating:123000 N; Ab - Cage-Cone Frontface Clearance:-1 mm; Aa - Cage-Cone Backface Clearance:0.5 mm; |