Komatsu round 418-W25-1100 round	Housing Material:1045 Carbon Steel; Volume Discount:Available; Bearing Material:Steel; Shape:Flange Type; Flange Shape:Compact Type; Holder Width(inch):1-1/2; Number of Bearings:Double; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield);
Komatsu round 235-70-00320 round	B - Cone Width:26.000 mm; Y - ISO Factor9:1.49; e - ISO Factor8:0.4; Cg - Geometry Factor:0.0925; C1 - Dynamic Radial Rating (1 million revolutions)5:109000 N; Cone Part Number:JLM506848E; Cage Type:Stamped Steel; C0 - Static Radial Rating:123000 N; Ab - Cage-Cone Frontface Clearance:-1 mm; Aa - Cage-Cone Backface Clearance:0.5 mm;
Komatsu round 208-30-00202ST round	Series:29500; Ab - Cage-Cone Frontface Clearance:0.08 in; Cone Part Number:29585; G2 - Heat Generation Factor (Rib-Roller End):25.8; C90 - Dynamic Radial Rating (90 million revolutions)5:7610 lbf; C0 - Static Radial Rating:36300 lbf; B - Cone Width:1.0000 in; C1 - Dynamic Radial Rating (1 million revolutions)6:29400 lbf; Cg - Geometry Factor:0.111; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:13200 lbf;
Komatsu round 566-35-00022 round	Bearing Inner Dia. Shape:Cylindrical Bore Set; Seal:Silicone; Machining:No; Rolling Element Material:Bearing Steel; Fit:J7; Basic Load Rating, Static Rating(N):15400; Grease Type:SH44M; Unit Body Material:Cast Iron;
Komatsu round 10G-30-00060 round	A1:12 mm; J:64 mm; L:86 mm; Designation of bearing:SUC202; C0:6.8 kN; Recommended tightening torque for set screw:3.9 Nm; A:25.5 mm; e:15 mm; S:12.7 mm; s1:15.5 mm;
Komatsu round 540-30-22110KF round	Nref:16,000 rpm; Db max:42.5 mm; Brand:SNR; db min:25.5 mm; d1:30.5 mm; Characteristic inner ring frequency, BPFI:6.5 Hz; D2:43.2 mm; D:47 mm; B:14 mm; r1s min:0.6 mm;
Komatsu round 3BA-27-71421KF round	A1:12 mm; J:64 mm; L:86 mm; Designation of bearing:SUC202; C0:6.8 kN; Recommended tightening torque for set screw:3.9 Nm; A:25.5 mm; e:15 mm; S:12.7 mm; s1:15.5 mm;
Komatsu round 195-30-00381 round	Bearing Inner Dia. Shape:Cylindrical Bore Set; Seal:Silicone; Machining:No; Rolling Element Material:Bearing Steel; Fit:J7; Basic Load Rating, Static Rating(N):15400; Grease Type:SH44M; Unit Body Material:Cast Iron;