Komatsu round 6162-43-2022 round	T min.:-40 °C; H1:11 mm; C0:4.78 kN; Designation of open end cover:SCOE201-12; Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:ES201G2T04; N1:14 mm; d1:27.2 mm; C:9.55 kN; Dz:46 mm;
Komatsu round 6215-61-3650 round	N1:21 mm; Recommended tightening torque for set screw:8 Nm; A1:27 mm; T min.:-20 °C; B:42.9 mm; Designation of housing:PE207N-; A:45 mm; H1:19 mm; Designation of bearing:UC207-20G2T20; N:14mm;
Komatsu round 232-43-12120 round	Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Number of Bearings:Single; Flange O.D. H(φ):81; Type:Bearings with Housin;
Komatsu round 208-30-00202ST round	Series:29500; Ab - Cage-Cone Frontface Clearance:0.08 in; Cone Part Number:29585; G2 - Heat Generation Factor (Rib-Roller End):25.8; C90 - Dynamic Radial Rating (90 million revolutions)5:7610 lbf; C0 - Static Radial Rating:36300 lbf; B - Cone Width:1.0000 in; C1 - Dynamic Radial Rating (1 million revolutions)6:29400 lbf; Cg - Geometry Factor:0.111; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:13200 lbf;
Komatsu round 21U-27-31110 round	Fatigue limit load, Cu:0.15 kN; Characteristic outer ring frequency, BPF0:3.14 Hz; Mass:0.04 kg; Brand:NTN; f0:13.6; da min:19 mm; D:35 mm; Radial clearance class:CN; Nlim (oil):24,000 rpm; Nlim (grease):20,000 rpm;
Komatsu round 21U-30-31301 round	Fatigue limit load, Cu:0.15 kN; Characteristic outer ring frequency, BPF0:3.14 Hz; Mass:0.04 kg; Brand:NTN; f0:13.6; da min:19 mm; D:35 mm; Radial clearance class:CN; Nlim (oil):24,000 rpm; Nlim (grease):20,000 rpm;
Komatsu round 3BB-27-31130KF round	Bearing I.D. d(mm):20; Bearing Material:[Steel] Steel; RoHS:6; Type:Bearings with Housin; Bearing Part Number:6004; Days to Ship:7 Days; Width T(mm):60; Bearing Retained:Yes (with retaining; Number of Bearings:Double;
Komatsu round 20Y-30-08300 round	B - Cone Width:26.000 mm; Y - ISO Factor9:1.49; e - ISO Factor8:0.4; Cg - Geometry Factor:0.0925; C1 - Dynamic Radial Rating (1 million revolutions)5:109000 N; Cone Part Number:JLM506848E; Cage Type:Stamped Steel; C0 - Static Radial Rating:123000 N; Ab - Cage-Cone Frontface Clearance:-1 mm; Aa - Cage-Cone Backface Clearance:0.5 mm;