Komatsu MAT 21J-54-13291 MAT	d:31.75 mm; Fatigue limit load, Cu:13.9 kN; Static load, C0:114 kN; C:23.81 mm; Min operating temperature, Tmin:-40 °C; B:29.77 mm; T:29.37 mm; ra max:1.3 mm; Max operating temperature, Tmax:120 °C; D:79.38 mm;
Komatsu MAT 195-54-68971 MAT	da min:186 mm; B:52 mm; Max operating temperature, Tmax:120 °C; ra max:3 mm; Nlim (grease):2,200 rpm; d:170 mm; Mass (without HJ ring):17.3 kg; F:208 mm; Dynamic load, C:475 kN; rs min:4 mm;
Komatsu MAT 23B-54-62311 MAT	Designation of closed end cover:SCC210; Z:76 mm; T min.:-40 °C; B:51.6 mm; N:20mm; T max.:100 °C; C0:23.2 kN; A:60 mm; H1:22 mm; s1:25.8 mm;
Komatsu MAT 22U-54-25411 MAT	Shape:Flanged Pilot Type; Housing Material:[Aluminum Alloy] 201; Flange O.D. H(φ):41; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days; RoHS:6; Bearing I.D. d(mm):6; Holder Surface Treatment:Clear Anodize;
Komatsu MAT 21J-54-13461 MAT	d:31.75 mm; Fatigue limit load, Cu:13.9 kN; Static load, C0:114 kN; C:23.81 mm; Min operating temperature, Tmin:-40 °C; B:29.77 mm; T:29.37 mm; ra max:1.3 mm; Max operating temperature, Tmax:120 °C; D:79.38 mm;
Komatsu MAT 20U-54-41910 MAT	T max.:100 °C; m:14 mm; d:82.55 mm; C1:11 mm; D:150 mm; Weight:3.32 kg; T min.:-20 °C; r:2; SW:5.56 mm; C:35 mm;
Komatsu MAT 20C-54-31920 MAT	Designation of closed end cover:SCC210; Z:76 mm; T min.:-40 °C; B:51.6 mm; N:20mm; T max.:100 °C; C0:23.2 kN; A:60 mm; H1:22 mm; s1:25.8 mm;
Komatsu MAT 567-54-41390 MAT	Grease Lubrication - T Seal:2000 rpm; Pre Install Clearance Max:0.0039 in; Dimension D Min:10.81 in; Dimension K:1.44 in; Dimension B:7.92 in; Dimension C:4.76 in; Oil Lubrication - T Seal:2400 rpm; Pre Install Clearance Min:0.0024 in; e - Geometry Factor:0.23; Dimension A:4.00 in;