Komatsu MAT 21J-54-13292 MAT	Dimension B1:1.906 in; Bore Type:Cylindrical bore; Outside Ring Width C:18.000 mm; Dimension B2:0.626 in; Set Screw Size:5/16-18; Bearing Type:Ball Bearing; Seal Type:Labyrinth Seal; O.D. Type:Spherical OD; Shaft Size d:1 1/4 in; Static Load Rating:2530 lbf;
Komatsu MAT 113-X79-1760 MAT	Nref:5,800 rpm; Static load, C0:152 kN; D1:77 mm; Radial clearance class:CN; Min operating temperature, Tmin:-40 °C; d2:52.5 mm; k:3 mm; ra max:1.5 mm; Characteristic cage frequency, FTF:0.4 Hz; da min:49 mm;
Komatsu MAT 21W-968-1310 MAT	T max.:100 °C; m:14 mm; d:82.55 mm; C1:11 mm; D:150 mm; Weight:3.32 kg; T min.:-20 °C; r:2; SW:5.56 mm; C:35 mm;
Komatsu MAT 234-54-81120 MAT	d:31.75 mm; Fatigue limit load, Cu:13.9 kN; Static load, C0:114 kN; C:23.81 mm; Min operating temperature, Tmin:-40 °C; B:29.77 mm; T:29.37 mm; ra max:1.3 mm; Max operating temperature, Tmax:120 °C; D:79.38 mm;
Komatsu MAT 22U-54-25411 MAT	Grease Lubrication - T Seal:2000 rpm; Pre Install Clearance Max:0.0039 in; Dimension D Min:10.81 in; Dimension K:1.44 in; Dimension B:7.92 in; Dimension C:4.76 in; Oil Lubrication - T Seal:2400 rpm; Pre Install Clearance Min:0.0024 in; e - Geometry Factor:0.23; Dimension A:4.00 in;
Komatsu MAT 21U-979-5560 MAT	Stroke:No; Accessory:With steel plate cov; Days to Ship:8 Days; Pillow Type, Category:Standard; Basic Load Rating, Static Rating(N):44100; B:79.4; Unit, Type:Insert Bearing Unit; Diameter series symbol:Used for Light load; Seal:Silicone; Grease Type:SH44M;
Komatsu MAT 3EC-50-49610KF MAT	Grease Lubrication - T Seal:2000 rpm; Pre Install Clearance Max:0.0039 in; Dimension D Min:10.81 in; Dimension K:1.44 in; Dimension B:7.92 in; Dimension C:4.76 in; Oil Lubrication - T Seal:2400 rpm; Pre Install Clearance Min:0.0024 in; e - Geometry Factor:0.23; Dimension A:4.00 in;
Komatsu MAT 569-54-85771 MAT	da min:186 mm; B:52 mm; Max operating temperature, Tmax:120 °C; ra max:3 mm; Nlim (grease):2,200 rpm; d:170 mm; Mass (without HJ ring):17.3 kg; F:208 mm; Dynamic load, C:475 kN; rs min:4 mm;