Komatsu Steel wire assembly "	Inner Race Width:0 Inch | 0 Millimete; Bore:1.378 Inch | 35 Mill; Minimum Buy Quantity:N/A; Internal Special Features:No; Manufacturer Name:NTN; Enclosure:2 Seals; Noun:Bearing; Weight / LBS:0.635; Characteristic rolling element frequency, BSF:4.61 Hz; Inch - Metric:Metric;
Komatsu Steel wire assembly "	T min.:-40 °C; d:57.15 mm; G:M6x1; e:29 mm; Designation of bearing:ES212-36G2T04; A:48 mm; Designation of housing:FA212-; d1:82 mm; B1:49.3 mm; A1:20 mm;
Komatsu Steel wire assembly "	Inner Race Width:0 Inch | 0 Millimete; Bore:1.378 Inch | 35 Mill; Minimum Buy Quantity:N/A; Internal Special Features:No; Manufacturer Name:NTN; Enclosure:2 Seals; Noun:Bearing; Weight / LBS:0.635; Characteristic rolling element frequency, BSF:4.61 Hz; Inch - Metric:Metric;
Komatsu Steel wire assembly "195-06-41220 Steel wire assembly	Bearing Used:Deep Groove Ball Bea; T(mm):23 ～ 50; Number of Bearings:Double; Type:Bearings with Housin; Thickness, Height Indication:T, h Configurable; Holder Surface Treatment:Clear Anodize; Housing Material:[Aluminum Alloy] Alu; Bearing Retained:No; Lateral Width L(mm):36;
Komatsu Steel wire assembly "14X-06-14743 Steel wire assembly	Recommended tightening torque for set screw:11.5 Nm; Designation of bearing:ES207G2T04; Designation of open end cover:SCOE207-35; H2:94 mm; L:167 mm; d1:51.1 mm; C0:15.2 kN; S:9.5 mm; H1:19 mm; Dz:80 mm;
Komatsu Steel wire assembly "135-06-34140 Steel wire assembly	Fit:J7; Accessory:No Cover; Bearing Unit, Type:Square flange shape; Bearing Inner Dia. Shape:Tapered hole adapter; Surface Treatment:No; Unit Body Material:Cast Iron; Grease Type:Standard Grease; Basic Load Rating, Static Rating(N):11300; Days to Ship:Quote; Unit, Type:Insert Bearing Unit;
Komatsu Steel wire assembly "	T min.:-40 °C; d:57.15 mm; G:M6x1; e:29 mm; Designation of bearing:ES212-36G2T04; A:48 mm; Designation of housing:FA212-; d1:82 mm; B1:49.3 mm; A1:20 mm;
Komatsu Steel wire assembly "	A:48 mm; H:47.6 mm; E:22 mm; Designation of housing:PG207N-; N:M12; Recommended tightening torque for set screw:11.5 Nm; S:18.8 mm; J:68 mm; d1:51.1 mm; T min.:-40 °C;