Komatsu HANDRAIL 426-54-65260 HANDRAIL	C Chamfered:Not Provided; Seals:ZZ (Double Shield); Type:Bearings with Housin; RoHS:6; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Bearing Retained:Yes (with retaining; Bearing Part Number:625;
Komatsu HANDRAIL 42C-54-15132 HANDRAIL	d1:62 mm; N:14mm; d:42.86 mm; C:31.85 kN; T min.:-20 °C; T max.:100 °C; Weight:1.86 kg; A1:13 mm; B:30.2 mm; C0:20.8 kN;
Komatsu HANDRAIL 42C-54-15164 HANDRAIL	H1:70.0 mm; End Cover2:EC512-610; Adapter Sleeve1:HA2310; A:105.00 mm; Jmin:205 mm; Shaft Diameter d:1 11/16 in; J:210.00 mm; A1:70 mm; A2:117 mm; Material :Cast Iron;
Komatsu HANDRAIL 42C-Z89-5282 HANDRAIL	Dimension L :21-21/32 in; Dimension K :3-3/4 in; Bolt Size:4 x 1; Dimension M :6-1/4 in; Support Type:Four-Bolt Plummer Bl; Seal Type:Felt Type; Dimension J1 :19-1/4 in; Housing Width:7.3 in; Maximum Speed:1450 rpm; Dimension J2 :17-3/8 in;
Komatsu HANDRAIL 426-54-65290 HANDRAIL	s1:24.6 mm; A1:16 mm; A2:52.2 mm; Recommended tightening torque for set screw:8 Nm; G:M6x1; L:137 mm; N:16mm; Designation of housing:F209-; Designation of bearing:UC209-27G2T20; T min.:-20 °C;
Komatsu HANDRAIL 425-54-42650 HANDRAIL	Recommended tightening torque for set screw:8 Nm; A2:51.2 mm; s1:24.6 mm; Z:32 mm; T max.:100 °C; Designation of bearing:UC208-24G2L3; C0:18.2 kN; G:M6x1; A:36 mm; J:102 mm;
Komatsu HANDRAIL 206-54-84251 HANDRAIL	Stroke:No; Basic Load Rating, Dynamic Rating(N):25700; Fit:J7; Surface Treatment:No; Unit Body Material:Cast Iron; Bearing Unit, Type:Irregular Shape Flan; Bearing Inner Dia. Shape:Cylindrical Bore Set;
Komatsu HANDRAIL 417-923-3940 HANDRAIL	C Chamfered:Not Provided; Seals:ZZ (Double Shield); Type:Bearings with Housin; RoHS:6; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Bearing Retained:Yes (with retaining; Bearing Part Number:625;