Komatsu HANDRAIL 41L-54-25110 HANDRAIL	C Chamfered:Not Provided; Seals:ZZ (Double Shield); Type:Bearings with Housin; RoHS:6; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Bearing Retained:Yes (with retaining; Bearing Part Number:625;
Komatsu HANDRAIL 416-926-5210 HANDRAIL	da min:41.5 mm; Characteristic outer ring frequency, BPF0:3.56 Hz; Mass:0.29 kg; Characteristic inner ring frequency, BPFI:5.44 Hz; da max:45 mm; ra max:1 mm; Brand:NTN; D:72 mm; f0:13.8; Da max:65.5 mm;
Komatsu HANDRAIL 427-54-25130 HANDRAIL	H1:70.0 mm; End Cover2:EC512-610; Adapter Sleeve1:HA2310; A:105.00 mm; Jmin:205 mm; Shaft Diameter d:1 11/16 in; J:210.00 mm; A1:70 mm; A2:117 mm; Material :Cast Iron;
Komatsu HANDRAIL 207-54-41811 HANDRAIL	Housing Material:1045 Carbon Steel; T(mm):45 ～ 60; Thickness, Height Indication:T Selection, h Confi; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Lateral Width L(mm):62; Seals:VV (Non-Contact Rubb;
Komatsu HANDRAIL 569-54-8L970 HANDRAIL	L:100 mm; S:17 mm; G:M6x1; A2:28.5 mm; B1:43.5 mm; C0:6.65 kN; A1:8 mm; d:12 mm; T max.:100 °C; s1:30.5 mm;
Komatsu HANDRAIL 23H-54-15111 HANDRAIL	H1:70.0 mm; End Cover2:EC512-610; Adapter Sleeve1:HA2310; A:105.00 mm; Jmin:205 mm; Shaft Diameter d:1 11/16 in; J:210.00 mm; A1:70 mm; A2:117 mm; Material :Cast Iron;
Komatsu HANDRAIL 421-54-66111 HANDRAIL	Recommended tightening torque for set screw:8 Nm; A2:51.2 mm; s1:24.6 mm; Z:32 mm; T max.:100 °C; Designation of bearing:UC208-24G2L3; C0:18.2 kN; G:M6x1; A:36 mm; J:102 mm;
Komatsu HANDRAIL 21T-54-34341 HANDRAIL	C Chamfered:Not Provided; Seals:ZZ (Double Shield); Type:Bearings with Housin; RoHS:6; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Bearing Retained:Yes (with retaining; Bearing Part Number:625;