Komatsu HANDRAIL 21T-919-5510 HANDRAIL	Stroke:No; Basic Load Rating, Dynamic Rating(N):25700; Fit:J7; Surface Treatment:No; Unit Body Material:Cast Iron; Bearing Unit, Type:Irregular Shape Flan; Bearing Inner Dia. Shape:Cylindrical Bore Set;
Komatsu HANDRAIL 426-54-35123 HANDRAIL	Recommended tightening torque for set screw:8 Nm; A2:51.2 mm; s1:24.6 mm; Z:32 mm; T max.:100 °C; Designation of bearing:UC208-24G2L3; C0:18.2 kN; G:M6x1; A:36 mm; J:102 mm;
Komatsu HANDRAIL 208-54-41833 HANDRAIL	L:100 mm; S:17 mm; G:M6x1; A2:28.5 mm; B1:43.5 mm; C0:6.65 kN; A1:8 mm; d:12 mm; T max.:100 °C; s1:30.5 mm;
Komatsu HANDRAIL 427-54-25130 HANDRAIL	s1:24.6 mm; A1:16 mm; A2:52.2 mm; Recommended tightening torque for set screw:8 Nm; G:M6x1; L:137 mm; N:16mm; Designation of housing:F209-; Designation of bearing:UC209-27G2T20; T min.:-20 °C;
Komatsu HANDRAIL 427-54-25812 HANDRAIL	C Chamfered:Not Provided; Seals:ZZ (Double Shield); Type:Bearings with Housin; RoHS:6; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Bearing Retained:Yes (with retaining; Bearing Part Number:625;
Komatsu HANDRAIL 427-S05-5790 HANDRAIL	da min:41.5 mm; Characteristic outer ring frequency, BPF0:3.56 Hz; Mass:0.29 kg; Characteristic inner ring frequency, BPFI:5.44 Hz; da max:45 mm; ra max:1 mm; Brand:NTN; D:72 mm; f0:13.8; Da max:65.5 mm;
Komatsu HANDRAIL 423-54-65131 HANDRAIL	s1:24.6 mm; A1:16 mm; A2:52.2 mm; Recommended tightening torque for set screw:8 Nm; G:M6x1; L:137 mm; N:16mm; Designation of housing:F209-; Designation of bearing:UC209-27G2T20; T min.:-20 °C;
Komatsu HANDRAIL 418-923-4390 HANDRAIL	C Chamfered:Not Provided; Seals:ZZ (Double Shield); Type:Bearings with Housin; RoHS:6; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Bearing Retained:Yes (with retaining; Bearing Part Number:625;