Komatsu HANDRAIL 42C-54-15131 HANDRAIL	Dimension L :21-21/32 in; Dimension K :3-3/4 in; Bolt Size:4 x 1; Dimension M :6-1/4 in; Support Type:Four-Bolt Plummer Bl; Seal Type:Felt Type; Dimension J1 :19-1/4 in; Housing Width:7.3 in; Maximum Speed:1450 rpm; Dimension J2 :17-3/8 in;
Komatsu HANDRAIL 427-54-25311 HANDRAIL	Recommended tightening torque for set screw:8 Nm; A2:51.2 mm; s1:24.6 mm; Z:32 mm; T max.:100 °C; Designation of bearing:UC208-24G2L3; C0:18.2 kN; G:M6x1; A:36 mm; J:102 mm;
Komatsu HANDRAIL 22P-54-22191 HANDRAIL	Da - Outer Ring Backing Diameter:369.000 mm; Reference Thermal Speed Rating (Oil)7:1300; C1(2) - Dynamic Radial Rating (Two-Rows):1820000 N; B - Inner Ring Width:104 mm; D:400.000 mm; C0 - Static Radial Rating:2740000 N; r - Outer Ring To Clear Radius2:3.0 mm; Bearing Weight:47.600 Kg; da - Inner Ring Backing Diameter:291.000 mm; R - Inner Ring To Clear Radius1:3.0 mm;
Komatsu HANDRAIL 2A5-54-21160 HANDRAIL	C Chamfered:Not Provided; Seals:ZZ (Double Shield); Type:Bearings with Housin; RoHS:6; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Bearing Retained:Yes (with retaining; Bearing Part Number:625;
Komatsu HANDRAIL 42C-54-15164 HANDRAIL	H1:70.0 mm; End Cover2:EC512-610; Adapter Sleeve1:HA2310; A:105.00 mm; Jmin:205 mm; Shaft Diameter d:1 11/16 in; J:210.00 mm; A1:70 mm; A2:117 mm; Material :Cast Iron;
Komatsu HANDRAIL 428-Z90-2412 HANDRAIL	Dimension L :21-21/32 in; Dimension K :3-3/4 in; Bolt Size:4 x 1; Dimension M :6-1/4 in; Support Type:Four-Bolt Plummer Bl; Seal Type:Felt Type; Dimension J1 :19-1/4 in; Housing Width:7.3 in; Maximum Speed:1450 rpm; Dimension J2 :17-3/8 in;
Komatsu HANDRAIL 427-54-25165 HANDRAIL	Da - Outer Ring Backing Diameter:369.000 mm; Reference Thermal Speed Rating (Oil)7:1300; C1(2) - Dynamic Radial Rating (Two-Rows):1820000 N; B - Inner Ring Width:104 mm; D:400.000 mm; C0 - Static Radial Rating:2740000 N; r - Outer Ring To Clear Radius2:3.0 mm; Bearing Weight:47.600 Kg; da - Inner Ring Backing Diameter:291.000 mm; R - Inner Ring To Clear Radius1:3.0 mm;
Komatsu HANDRAIL 427-54-29471 HANDRAIL	Fit:J7; Machining:No; RoHS:6; Unit, Type:Insert Bearing Unit; Bearing Unit, Type:Square flange shape; Seal:Triple seals; Diameter series symbol:For Heavy Load; Basic Load Rating, Dynamic Rating(N):133000; Unit Body Material:Cast Iron; Accessory:With steel plate cov;