Komatsu HANDRAIL 207-54-41831 HANDRAIL	Housing Material:1045 Carbon Steel; T(mm):45 ～ 60; Thickness, Height Indication:T Selection, h Confi; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Lateral Width L(mm):62; Seals:VV (Non-Contact Rubb;
Komatsu HANDRAIL 22B-54-42571 HANDRAIL	s1:24.6 mm; A1:16 mm; A2:52.2 mm; Recommended tightening torque for set screw:8 Nm; G:M6x1; L:137 mm; N:16mm; Designation of housing:F209-; Designation of bearing:UC209-27G2T20; T min.:-20 °C;
Komatsu HANDRAIL 20Y-54-79650 HANDRAIL	s1:24.6 mm; A1:16 mm; A2:52.2 mm; Recommended tightening torque for set screw:8 Nm; G:M6x1; L:137 mm; N:16mm; Designation of housing:F209-; Designation of bearing:UC209-27G2T20; T min.:-20 °C;
Komatsu HANDRAIL 21K-54-74750 HANDRAIL	Recommended tightening torque for set screw:8 Nm; A2:51.2 mm; s1:24.6 mm; Z:32 mm; T max.:100 °C; Designation of bearing:UC208-24G2L3; C0:18.2 kN; G:M6x1; A:36 mm; J:102 mm;
Komatsu HANDRAIL 42C-Z89-2860 HANDRAIL	da min:41.5 mm; Characteristic outer ring frequency, BPF0:3.56 Hz; Mass:0.29 kg; Characteristic inner ring frequency, BPFI:5.44 Hz; da max:45 mm; ra max:1 mm; Brand:NTN; D:72 mm; f0:13.8; Da max:65.5 mm;
Komatsu HANDRAIL 21K-54-51291 HANDRAIL	H1:70.0 mm; End Cover2:EC512-610; Adapter Sleeve1:HA2310; A:105.00 mm; Jmin:205 mm; Shaft Diameter d:1 11/16 in; J:210.00 mm; A1:70 mm; A2:117 mm; Material :Cast Iron;
Komatsu HANDRAIL 234-952-8860 HANDRAIL	Dimension L :21-21/32 in; Dimension K :3-3/4 in; Bolt Size:4 x 1; Dimension M :6-1/4 in; Support Type:Four-Bolt Plummer Bl; Seal Type:Felt Type; Dimension J1 :19-1/4 in; Housing Width:7.3 in; Maximum Speed:1450 rpm; Dimension J2 :17-3/8 in;
Komatsu HANDRAIL 2A5-54-K1250 HANDRAIL	H1:70.0 mm; End Cover2:EC512-610; Adapter Sleeve1:HA2310; A:105.00 mm; Jmin:205 mm; Shaft Diameter d:1 11/16 in; J:210.00 mm; A1:70 mm; A2:117 mm; Material :Cast Iron;