Komatsu Steps 209-54-75211 Steps	Specifications/Environment:Standard; Max. Allowed rpm(rpm):8400; Precision:Grade 0; B:9; Seal, Shield Symbols:LU; Number of Raceway Ring Rows:Single Row; Bearing Style:Rubber Sealed; Type:Ball; Basic Dynamic Load Rating(N):7250; Outer Ring Shape:Flat;
Komatsu Steps 209-30-71450 Steps	Max operating temperature, Tmax:120 °C; da min:17 mm; Inventory:0.0; Min operating temperature, Tmin:-20 °C; Weight / Kilogram:0.03; f0:13.9; D:32 mm; Dynamic load, C:5.6 kN; Fatigue limit load, Cu:0.13 kN; Characteristic outer ring frequency, BPF0:3.59 Hz;
Komatsu Steps 209-54-43950 Steps	Ab - Cage-Cone Frontface Clearance:0.2 in; d:13.6250 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:676000 lbf; Y1 - ISO Factor9:2.02; B - Double Cone Width:6.8750 in; da - Cone Frontface Backing Diameter:14.61 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:57700 lbf; Aa - Cage-Cone Backface Clearance:0 in; Y2 - ISO Factor10:3; r - Cup Backface To Clear Radius2:0.130 in;
Komatsu Steps 209-30-61850 Steps	N:M10; s1:24.2 mm; A:38 mm; T max.:100 °C; T min.:-20 °C; Designation of closed end cover:SCCE205; S:7.5 mm; d:25 mm; A1:23 mm; C0:7.88 kN;
Komatsu Steps 419-883-1120 FORK	Specifications/Environment:Standard; Max. Allowed rpm(rpm):8400; Precision:Grade 0; B:9; Seal, Shield Symbols:LU; Number of Raceway Ring Rows:Single Row; Bearing Style:Rubber Sealed; Type:Ball; Basic Dynamic Load Rating(N):7250; Outer Ring Shape:Flat;
Komatsu Steps 11G-30-37210 Steps	Ab - Cage-Cone Frontface Clearance:5.3 mm; Cage Type:Stamped Steel; B - Cone Width:63.5 mm; d:209.550 mm; G1 - Heat Generation Factor (Roller-Raceway):912.5; K - Factor7:1.12; Da - Cup Frontface Backing Diameter:300.00 mm; Cone Part Number:DX940730; Bearing Weight:16.700 Kg; Cup Part Number:DX252051;
Komatsu Steps 566-54-6A370 Steps	A2:29.5 mm; T min.:-20 °C; Z:39.1 mm; H3:70; Designation of bearing:US205-14G2T20; S:7.5 mm; C:14 kN; C0:7.88 kN; s1:13.5 mm; Dz:60 mm;
Komatsu Steps 209-54-77661 Steps	T max.:200 °C; A1:16 mm; Weight:1.17 kg; J:130 mm; H:161 mm; S:8.5 mm; Recommended tightening torque for set screw:8 Nm; Designation of housing:FA207-; T min.:-20 °C; e:19 mm;