Komatsu Steps 126-72-11263 Steps	Max operating temperature, Tmax:120 °C; da min:17 mm; Inventory:0.0; Min operating temperature, Tmin:-20 °C; Weight / Kilogram:0.03; f0:13.9; D:32 mm; Dynamic load, C:5.6 kN; Fatigue limit load, Cu:0.13 kN; Characteristic outer ring frequency, BPF0:3.59 Hz;
Komatsu Steps 21N-54-12550 Steps	Flange Shape:Square Type; Days to Ship:7 Days; Width T(mm):35; Bearing Part Number:6802; Shape:Flanged Pilot Type; Seals:VV (Non-Contact Rubb; Flange O.D. H(φ):50; Type:Bearings with Housin; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea;
Komatsu Steps 22X-15-13610K1 FORK	T max.:200 °C; A1:16 mm; Weight:1.17 kg; J:130 mm; H:161 mm; S:8.5 mm; Recommended tightening torque for set screw:8 Nm; Designation of housing:FA207-; T min.:-20 °C; e:19 mm;
Komatsu Steps 14X-14-12860 FORK	T max.:200 °C; A1:16 mm; Weight:1.17 kg; J:130 mm; H:161 mm; S:8.5 mm; Recommended tightening torque for set screw:8 Nm; Designation of housing:FA207-; T min.:-20 °C; e:19 mm;
Komatsu Steps 37C-ZKT-2197KF FORK	Surface Treatment:No; Machining:No; Basic Load Rating, Dynamic Rating(N):72700; Basic Load Rating, Static Rating(N):53000; Fit:J7; Days to Ship:Quote; Diameter series symbol:Used for Light load; RoHS:6; Unit, Type:Insert Bearing Unit;
Komatsu Steps 569-54-61722 Steps	Z:23.5 mm; Designation of bearing:SES205; A1:13 mm; L:68 mm; d:25 mm; s1:24.25 mm; A:27 mm; N:13.5mm; Weight:0.62 kg; B:21.5 mm;
Komatsu Steps 203-30-K2630 Steps	Series:32008XC; G1 - Heat Generation Factor (Roller-Raceway):23.9; a - Effective Center Location3:-4.1 mm; K - Factor5:1.54; Aa - Cage-Cone Backface Clearance:0.3 mm; G2 - Heat Generation Factor (Rib-Roller End):11.7; Cone Part Number:X32008XCM; Cage Type:Stamped Steel; e - ISO Factor6:0.38; C - Cup Width:14.500 mm;
Komatsu Steps 3BB-50-42810KF Steps	Specifications/Environment:Standard; Max. Allowed rpm(rpm):8400; Precision:Grade 0; B:9; Seal, Shield Symbols:LU; Number of Raceway Ring Rows:Single Row; Bearing Style:Rubber Sealed; Type:Ball; Basic Dynamic Load Rating(N):7250; Outer Ring Shape:Flat;