Komatsu Steps 419-883-1120 FORK | A2:29.5 mm; T min.:-20 °C; Z:39.1 mm; H3:70; Designation of bearing:US205-14G2T20; S:7.5 mm; C:14 kN; C0:7.88 kN; s1:13.5 mm; Dz:60 mm; |
Komatsu Steps 209-54-77661 Steps | T max.:200 °C; A1:16 mm; Weight:1.17 kg; J:130 mm; H:161 mm; S:8.5 mm; Recommended tightening torque for set screw:8 Nm; Designation of housing:FA207-; T min.:-20 °C; e:19 mm; |
Komatsu Steps 421-20-24510CL transmission | Max operating temperature, Tmax:120 °C; da min:17 mm; Inventory:0.0; Min operating temperature, Tmin:-20 °C; Weight / Kilogram:0.03; f0:13.9; D:32 mm; Dynamic load, C:5.6 kN; Fatigue limit load, Cu:0.13 kN; Characteristic outer ring frequency, BPF0:3.59 Hz; |
Komatsu Steps 418-U77-5630 FORK | Designation of bearing:US210-31G2T20; A5:32.6 mm; d:49.21 mm; H2:61 mm; Designation of housing:SP208-210/90N-; S:10.9 mm; Z:23.5 mm; A:31 mm; L1:260 mm; s1:21.75 mm; |
Komatsu Steps 426-54-24230 Steps | Ab - Cage-Cone Frontface Clearance:5.3 mm; Cage Type:Stamped Steel; B - Cone Width:63.5 mm; d:209.550 mm; G1 - Heat Generation Factor (Roller-Raceway):912.5; K - Factor7:1.12; Da - Cup Frontface Backing Diameter:300.00 mm; Cone Part Number:DX940730; Bearing Weight:16.700 Kg; Cup Part Number:DX252051; |
Komatsu Steps 195-904-5310 Steps | T max.:200 °C; A1:16 mm; Weight:1.17 kg; J:130 mm; H:161 mm; S:8.5 mm; Recommended tightening torque for set screw:8 Nm; Designation of housing:FA207-; T min.:-20 °C; e:19 mm; |
Komatsu Steps 198-54-42412 Steps | Series:32008XC; G1 - Heat Generation Factor (Roller-Raceway):23.9; a - Effective Center Location3:-4.1 mm; K - Factor5:1.54; Aa - Cage-Cone Backface Clearance:0.3 mm; G2 - Heat Generation Factor (Rib-Roller End):11.7; Cone Part Number:X32008XCM; Cage Type:Stamped Steel; e - ISO Factor6:0.38; C - Cup Width:14.500 mm; |
Komatsu Steps 21N-54-12550 Steps | Surface Treatment:No; Machining:No; Basic Load Rating, Dynamic Rating(N):72700; Basic Load Rating, Static Rating(N):53000; Fit:J7; Days to Ship:Quote; Diameter series symbol:Used for Light load; RoHS:6; Unit, Type:Insert Bearing Unit; |