Komatsu Steps 14X-14-12860 FORK	T max.:200 °C; A1:16 mm; Weight:1.17 kg; J:130 mm; H:161 mm; S:8.5 mm; Recommended tightening torque for set screw:8 Nm; Designation of housing:FA207-; T min.:-20 °C; e:19 mm;
Komatsu Steps 198-54-42422 Steps	N:M10; s1:24.2 mm; A:38 mm; T max.:100 °C; T min.:-20 °C; Designation of closed end cover:SCCE205; S:7.5 mm; d:25 mm; A1:23 mm; C0:7.88 kN;
Komatsu Steps 209-62-76340 Steps	Ab - Cage-Cone Frontface Clearance:5.3 mm; Cage Type:Stamped Steel; B - Cone Width:63.5 mm; d:209.550 mm; G1 - Heat Generation Factor (Roller-Raceway):912.5; K - Factor7:1.12; Da - Cup Frontface Backing Diameter:300.00 mm; Cone Part Number:DX940730; Bearing Weight:16.700 Kg; Cup Part Number:DX252051;
Komatsu Steps 233-46-21580 Steps	Specifications/Environment:Standard; Max. Allowed rpm(rpm):8400; Precision:Grade 0; B:9; Seal, Shield Symbols:LU; Number of Raceway Ring Rows:Single Row; Bearing Style:Rubber Sealed; Type:Ball; Basic Dynamic Load Rating(N):7250; Outer Ring Shape:Flat;
Komatsu Steps 37B-7C1-3030KF FORK 1	T max.:200 °C; A1:16 mm; Weight:1.17 kg; J:130 mm; H:161 mm; S:8.5 mm; Recommended tightening torque for set screw:8 Nm; Designation of housing:FA207-; T min.:-20 °C; e:19 mm;
Komatsu Steps 427-54-12160 Steps	Series:32008XC; G1 - Heat Generation Factor (Roller-Raceway):23.9; a - Effective Center Location3:-4.1 mm; K - Factor5:1.54; Aa - Cage-Cone Backface Clearance:0.3 mm; G2 - Heat Generation Factor (Rib-Roller End):11.7; Cone Part Number:X32008XCM; Cage Type:Stamped Steel; e - ISO Factor6:0.38; C - Cup Width:14.500 mm;
Komatsu Steps 235-54-11980 Steps	T max.:200 °C; A1:16 mm; Weight:1.17 kg; J:130 mm; H:161 mm; S:8.5 mm; Recommended tightening torque for set screw:8 Nm; Designation of housing:FA207-; T min.:-20 °C; e:19 mm;
Komatsu Steps 419-883-1120 FORK	Specifications/Environment:Standard; Max. Allowed rpm(rpm):8400; Precision:Grade 0; B:9; Seal, Shield Symbols:LU; Number of Raceway Ring Rows:Single Row; Bearing Style:Rubber Sealed; Type:Ball; Basic Dynamic Load Rating(N):7250; Outer Ring Shape:Flat;