| Komatsu Tooth pedestal "423-847-1211 Tooth pedestal | Grease Lubrication - T Seal:1600 rpm; Dimension F:9.76 in; Pre Install Clearance Min:0.0043 in; Y2 - Geometry Factor:3.80; e - Geometry Factor:0.26; Oil Lubrication - M/N Seal:1200 rpm; Engineering Group:Mounted Bearing; Dimension G:1.25 in; Int Radial Clearance Reduction Max:0.0025 in; Shaft Size :3-1/2 in; |
| Komatsu Tooth pedestal "41B-Z20-1110 Tooth pedestal | Static load, C0:92 kN; B:23 mm; Characteristic cage frequency, FTF:0.42 Hz; Min operating temperature, Tmin:-40 °C; Fatigue limit load, Cu:8.65 kN; D:72 mm; Max operating temperature, Tmax:200 °C; Y2:3.29; Nlim:12,000 rpm; rs min:1.1 mm; |
| Komatsu Tooth pedestal "799-601-9220 Tooth pedestal | Housing Material:304 Stainless Steel; RoHS:6; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Type:Bearings with Housin; Shape:Flange Type; Bearing I.D. d(mm):17; Flange O.D. H(φ):60; Days to Ship:8 Days; |
| Komatsu Tooth pedestal " | S:19 mm; Designation of bearing:UC308-24G2T20; C:40.56 kN; SW:4.76 mm; Designation of housing:C308-; H:120 mm; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; s1:26 mm; A3:3 mm; |
| Komatsu Tooth pedestal " | Static load, C0:5 kN; Brand:NTN; Precision class:P0; D:62 mm; d:25 mm; Y1:2.3; Dynamic load, C:18.2 kN; Max operating temperature, Tmax:120 °C; Min operating temperature, Tmin:-20 °C; rs min:1.1 mm; |
| Komatsu Tooth pedestal " | Grease Lubrication - T Seal:1600 rpm; Dimension F:9.76 in; Pre Install Clearance Min:0.0043 in; Y2 - Geometry Factor:3.80; e - Geometry Factor:0.26; Oil Lubrication - M/N Seal:1200 rpm; Engineering Group:Mounted Bearing; Dimension G:1.25 in; Int Radial Clearance Reduction Max:0.0025 in; Shaft Size :3-1/2 in; |
| Komatsu Tooth pedestal " | Designation of bearing:EX205-14G2L4; L:115 mm; d:22.22 mm; Recommended tightening torque for set screw:3.7 Nm; C:14 kN; B:34.8 mm; Designation of housing:FC205-; N:12mm; G:M6x1; C0:7.88 kN; |
| Komatsu Tooth pedestal " | S:19 mm; Designation of bearing:UC308-24G2T20; C:40.56 kN; SW:4.76 mm; Designation of housing:C308-; H:120 mm; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; s1:26 mm; A3:3 mm; |