| Komatsu Tooth pedestal "799-601-7380 Tooth pedestal | Bearing I.D. d(mm):10; Number of Bearings:Double; Bearing Retained:No; Shape:Flanged Pilot Type; Width T(mm):40; Type:Bearings with Housin; Days to Ship:7 Days; Holder Surface Treatment:Clear Anodize; Housing Material:[Aluminum Alloy] 201; |
| Komatsu Tooth pedestal "142-70-12240 Tooth pedestal | Diameter series symbol:Used for Light load; d:65; Unit, Type:Insert Bearing Unit; Fit:J7; Pillow Type, Category:Standard; Bearing Inner Dia. Shape:Cylindrical Bore Set; B:76.2; Stroke:No; Bearing Unit, Type:Pillow Type; Rolling Element Material:Bearing Steel; |
| Komatsu Tooth pedestal " | Grease Lubrication - T Seal:1600 rpm; Dimension F:9.76 in; Pre Install Clearance Min:0.0043 in; Y2 - Geometry Factor:3.80; e - Geometry Factor:0.26; Oil Lubrication - M/N Seal:1200 rpm; Engineering Group:Mounted Bearing; Dimension G:1.25 in; Int Radial Clearance Reduction Max:0.0025 in; Shaft Size :3-1/2 in; |
| Komatsu Tooth pedestal " | Tensioning Unit Type:Tension Type; Dimension N:16.5 in; Cor - Static Load Rating:133087 lbf; Bearing UPC:013992033482; Bearing Type:Split Cylindrical Re; Cr - Dynamic Load Rating:102063 lbf; Dimension P:1.0 in; Dimension S:3.0 in; Ca - Axial Load Rating:7014 lbf; Dimension T:20.0 in; |
| Komatsu Tooth pedestal "209-70-74140 Tooth pedestal | Designation of bearing:EX205-14G2L4; L:115 mm; d:22.22 mm; Recommended tightening torque for set screw:3.7 Nm; C:14 kN; B:34.8 mm; Designation of housing:FC205-; N:12mm; G:M6x1; C0:7.88 kN; |
| Komatsu Tooth pedestal " | Diameter series symbol:Used for Light load; d:65; Unit, Type:Insert Bearing Unit; Fit:J7; Pillow Type, Category:Standard; Bearing Inner Dia. Shape:Cylindrical Bore Set; B:76.2; Stroke:No; Bearing Unit, Type:Pillow Type; Rolling Element Material:Bearing Steel; |
| Komatsu Tooth pedestal "791-830-1550 Tooth pedestal | T max.:100 °C; A1:30 mm; C0:18.2 kN; d:38.1 mm; A:54 mm; s1:39.7 mm; H:49.2 mm; Designation of housing:PG208-; B1:56.3 mm; E:22 mm; |
| Komatsu Tooth pedestal " | Static load, C0:92 kN; B:23 mm; Characteristic cage frequency, FTF:0.42 Hz; Min operating temperature, Tmin:-40 °C; Fatigue limit load, Cu:8.65 kN; D:72 mm; Max operating temperature, Tmax:200 °C; Y2:3.29; Nlim:12,000 rpm; rs min:1.1 mm; |