Komatsu Tooth pedestal "17M-78-21360 Tooth pedestal	Static load, C0:5 kN; Brand:NTN; Precision class:P0; D:62 mm; d:25 mm; Y1:2.3; Dynamic load, C:18.2 kN; Max operating temperature, Tmax:120 °C; Min operating temperature, Tmin:-20 °C; rs min:1.1 mm;
Komatsu Tooth pedestal "	G:R1/8"; Designation of housing:FLE206N-; Designation of open end cover:SCOU206-20; Z:46.3 mm; s1:19.05 mm; Recommended tightening torque for set screw:3.7 Nm; T min.:-20 °C; B:38.1 mm; C:19.5 kN; Designation of bearing:UC206-20G2L4;
Komatsu Tooth pedestal "	S:19 mm; Designation of bearing:UC308-24G2T20; C:40.56 kN; SW:4.76 mm; Designation of housing:C308-; H:120 mm; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; s1:26 mm; A3:3 mm;
Komatsu Tooth pedestal "	G:R1/8"; Designation of housing:FLE206N-; Designation of open end cover:SCOU206-20; Z:46.3 mm; s1:19.05 mm; Recommended tightening torque for set screw:3.7 Nm; T min.:-20 °C; B:38.1 mm; C:19.5 kN; Designation of bearing:UC206-20G2L4;
Komatsu Tooth pedestal "	Diameter series symbol:Used for Light load; d:65; Unit, Type:Insert Bearing Unit; Fit:J7; Pillow Type, Category:Standard; Bearing Inner Dia. Shape:Cylindrical Bore Set; B:76.2; Stroke:No; Bearing Unit, Type:Pillow Type; Rolling Element Material:Bearing Steel;
Komatsu Tooth pedestal "208-70-14143 Tooth pedestal	T max.:100 °C; A1:30 mm; C0:18.2 kN; d:38.1 mm; A:54 mm; s1:39.7 mm; H:49.2 mm; Designation of housing:PG208-; B1:56.3 mm; E:22 mm;
Komatsu Tooth pedestal "426-62-21530 Tooth pedestal	Grease Lubrication - T Seal:1600 rpm; Dimension F:9.76 in; Pre Install Clearance Min:0.0043 in; Y2 - Geometry Factor:3.80; e - Geometry Factor:0.26; Oil Lubrication - M/N Seal:1200 rpm; Engineering Group:Mounted Bearing; Dimension G:1.25 in; Int Radial Clearance Reduction Max:0.0025 in; Shaft Size  :3-1/2 in;
Komatsu Tooth pedestal "	T max.:100 °C; A1:30 mm; C0:18.2 kN; d:38.1 mm; A:54 mm; s1:39.7 mm; H:49.2 mm; Designation of housing:PG208-; B1:56.3 mm; E:22 mm;