| Komatsu Tooth pedestal " | Static load, C0:5 kN; Brand:NTN; Precision class:P0; D:62 mm; d:25 mm; Y1:2.3; Dynamic load, C:18.2 kN; Max operating temperature, Tmax:120 °C; Min operating temperature, Tmin:-20 °C; rs min:1.1 mm; |
| Komatsu Tooth pedestal " | Housing Material:304 Stainless Steel; RoHS:6; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Type:Bearings with Housin; Shape:Flange Type; Bearing I.D. d(mm):17; Flange O.D. H(φ):60; Days to Ship:8 Days; |
| Komatsu Tooth pedestal "799-601-9110 Tooth pedestal | Static load, C0:92 kN; B:23 mm; Characteristic cage frequency, FTF:0.42 Hz; Min operating temperature, Tmin:-40 °C; Fatigue limit load, Cu:8.65 kN; D:72 mm; Max operating temperature, Tmax:200 °C; Y2:3.29; Nlim:12,000 rpm; rs min:1.1 mm; |
| Komatsu Tooth pedestal "799-605-5210 Tooth pedestal | G:R1/8"; Designation of housing:FLE206N-; Designation of open end cover:SCOU206-20; Z:46.3 mm; s1:19.05 mm; Recommended tightening torque for set screw:3.7 Nm; T min.:-20 °C; B:38.1 mm; C:19.5 kN; Designation of bearing:UC206-20G2L4; |
| Komatsu Tooth pedestal " | Static load, C0:92 kN; B:23 mm; Characteristic cage frequency, FTF:0.42 Hz; Min operating temperature, Tmin:-40 °C; Fatigue limit load, Cu:8.65 kN; D:72 mm; Max operating temperature, Tmax:200 °C; Y2:3.29; Nlim:12,000 rpm; rs min:1.1 mm; |
| Komatsu Tooth pedestal "791-822-1210 Tooth pedestal | Series:6300; Cup Part Number:6325; Da - Cup Frontface Backing Diameter:5.00 in; Cg - Geometry Factor:0.0827; Y - ISO Factor3:1.85; D:5.3150 in; r - Cup Backface To Clear Radius1:0.12 in; Design Units:Imperial; Db - Cup Backface Backing Diameter:4.61 in; e - ISO Factor2:0.32; |
| Komatsu Tooth pedestal "423-847-1211 Tooth pedestal | Grease Lubrication - T Seal:1600 rpm; Dimension F:9.76 in; Pre Install Clearance Min:0.0043 in; Y2 - Geometry Factor:3.80; e - Geometry Factor:0.26; Oil Lubrication - M/N Seal:1200 rpm; Engineering Group:Mounted Bearing; Dimension G:1.25 in; Int Radial Clearance Reduction Max:0.0025 in; Shaft Size :3-1/2 in; |
| Komatsu Tooth pedestal " | G:R1/8"; Designation of housing:FLE206N-; Designation of open end cover:SCOU206-20; Z:46.3 mm; s1:19.05 mm; Recommended tightening torque for set screw:3.7 Nm; T min.:-20 °C; B:38.1 mm; C:19.5 kN; Designation of bearing:UC206-20G2L4; |