Komatsu Tooth pedestal "	Designation of housing:FL212-; d:61.91 mm; G:M6x1; L:140 mm; A:48 mm; H:250 mm; S:12 mm; Designation of bearing:ES212-39G2; N:23mm; e:29 mm;
Komatsu Tooth pedestal "	Static load, C0:92 kN; B:23 mm; Characteristic cage frequency, FTF:0.42 Hz; Min operating temperature, Tmin:-40 °C; Fatigue limit load, Cu:8.65 kN; D:72 mm; Max operating temperature, Tmax:200 °C; Y2:3.29; Nlim:12,000 rpm; rs min:1.1 mm;
Komatsu Tooth pedestal "	Bearing I.D. d(mm):10; Number of Bearings:Double; Bearing Retained:No; Shape:Flanged Pilot Type; Width T(mm):40; Type:Bearings with Housin; Days to Ship:7 Days; Holder Surface Treatment:Clear Anodize; Housing Material:[Aluminum Alloy] 201;
Komatsu Tooth pedestal "425-847-1211 Tooth pedestal	Diameter series symbol:Used for Light load; d:65; Unit, Type:Insert Bearing Unit; Fit:J7; Pillow Type, Category:Standard; Bearing Inner Dia. Shape:Cylindrical Bore Set; B:76.2; Stroke:No; Bearing Unit, Type:Pillow Type; Rolling Element Material:Bearing Steel;
Komatsu Tooth pedestal "	Designation of bearing:EX205-14G2L4; L:115 mm; d:22.22 mm; Recommended tightening torque for set screw:3.7 Nm; C:14 kN; B:34.8 mm; Designation of housing:FC205-; N:12mm; G:M6x1; C0:7.88 kN;
Komatsu Tooth pedestal "	Designation of bearing:EX205-14G2L4; L:115 mm; d:22.22 mm; Recommended tightening torque for set screw:3.7 Nm; C:14 kN; B:34.8 mm; Designation of housing:FC205-; N:12mm; G:M6x1; C0:7.88 kN;
Komatsu Tooth pedestal "	Type:Lock Nuts w/Tooth Wa; Volume Discount:Available; Shape:Round Shape; Screw Type:Metric (Fine) Thread; Thread Nominal M(mm):M35×1.5; Material:[Stainless Steel] 30; Days to Ship:6 Days; Surface Treatment:No Surface Treatment;
Komatsu Tooth pedestal "	Grease Lubrication - T Seal:1600 rpm; Dimension F:9.76 in; Pre Install Clearance Min:0.0043 in; Y2 - Geometry Factor:3.80; e - Geometry Factor:0.26; Oil Lubrication - M/N Seal:1200 rpm; Engineering Group:Mounted Bearing; Dimension G:1.25 in; Int Radial Clearance Reduction Max:0.0025 in; Shaft Size  :3-1/2 in;