Komatsu Tooth pedestal "	Type:Lock Nuts w/Tooth Wa; Volume Discount:Available; Shape:Round Shape; Screw Type:Metric (Fine) Thread; Thread Nominal M(mm):M35×1.5; Material:[Stainless Steel] 30; Days to Ship:6 Days; Surface Treatment:No Surface Treatment;
Komatsu Tooth pedestal "799-601-9110 Tooth pedestal	Static load, C0:92 kN; B:23 mm; Characteristic cage frequency, FTF:0.42 Hz; Min operating temperature, Tmin:-40 °C; Fatigue limit load, Cu:8.65 kN; D:72 mm; Max operating temperature, Tmax:200 °C; Y2:3.29; Nlim:12,000 rpm; rs min:1.1 mm;
Komatsu Tooth pedestal "791-832-1310 Tooth pedestal	Dimension P:1.3 in; Dimension H:5.1 in; Bolt Size:4 x M30; Dimension R:20.6 in; Shaft Size:7 in; Seal Type:Felt Seal; Dimension T:23.5 in; Bearing Type:Split Cylindrical Re; Bearing UPC:013992033086; Cr - Dynamic Load Rating:208398 lbf;
Komatsu Tooth pedestal "	Tensioning Unit Type:Tension Type; Dimension N:16.5 in; Cor - Static Load Rating:133087 lbf; Bearing UPC:013992033482; Bearing Type:Split Cylindrical Re; Cr - Dynamic Load Rating:102063 lbf; Dimension P:1.0 in; Dimension S:3.0 in; Ca - Axial Load Rating:7014 lbf; Dimension T:20.0 in;
Komatsu Tooth pedestal "	G:R1/8"; Designation of housing:FLE206N-; Designation of open end cover:SCOU206-20; Z:46.3 mm; s1:19.05 mm; Recommended tightening torque for set screw:3.7 Nm; T min.:-20 °C; B:38.1 mm; C:19.5 kN; Designation of bearing:UC206-20G2L4;
Komatsu Tooth pedestal "791-680-9630 Tooth pedestal	Static load, C0:5 kN; Brand:NTN; Precision class:P0; D:62 mm; d:25 mm; Y1:2.3; Dynamic load, C:18.2 kN; Max operating temperature, Tmax:120 °C; Min operating temperature, Tmin:-20 °C; rs min:1.1 mm;
Komatsu Tooth pedestal "423-847-1211 Tooth pedestal	Grease Lubrication - T Seal:1600 rpm; Dimension F:9.76 in; Pre Install Clearance Min:0.0043 in; Y2 - Geometry Factor:3.80; e - Geometry Factor:0.26; Oil Lubrication - M/N Seal:1200 rpm; Engineering Group:Mounted Bearing; Dimension G:1.25 in; Int Radial Clearance Reduction Max:0.0025 in; Shaft Size  :3-1/2 in;
Komatsu Tooth pedestal "	Designation of bearing:EX205-14G2L4; L:115 mm; d:22.22 mm; Recommended tightening torque for set screw:3.7 Nm; C:14 kN; B:34.8 mm; Designation of housing:FC205-; N:12mm; G:M6x1; C0:7.88 kN;