Komatsu Tooth pedestal "	Static load, C0:5 kN; Brand:NTN; Precision class:P0; D:62 mm; d:25 mm; Y1:2.3; Dynamic load, C:18.2 kN; Max operating temperature, Tmax:120 °C; Min operating temperature, Tmin:-20 °C; rs min:1.1 mm;
Komatsu Tooth pedestal "	Grease Lubrication - T Seal:1600 rpm; Dimension F:9.76 in; Pre Install Clearance Min:0.0043 in; Y2 - Geometry Factor:3.80; e - Geometry Factor:0.26; Oil Lubrication - M/N Seal:1200 rpm; Engineering Group:Mounted Bearing; Dimension G:1.25 in; Int Radial Clearance Reduction Max:0.0025 in; Shaft Size  :3-1/2 in;
Komatsu Tooth pedestal "209-72-54420 Tooth pedestal	Type:Lock Nuts w/Tooth Wa; Volume Discount:Available; Shape:Round Shape; Screw Type:Metric (Fine) Thread; Thread Nominal M(mm):M35×1.5; Material:[Stainless Steel] 30; Days to Ship:6 Days; Surface Treatment:No Surface Treatment;
Komatsu Tooth pedestal "	S:19 mm; Designation of bearing:UC308-24G2T20; C:40.56 kN; SW:4.76 mm; Designation of housing:C308-; H:120 mm; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; s1:26 mm; A3:3 mm;
Komatsu Tooth pedestal "796-632-1260 Tooth pedestal	T max.:100 °C; A1:30 mm; C0:18.2 kN; d:38.1 mm; A:54 mm; s1:39.7 mm; H:49.2 mm; Designation of housing:PG208-; B1:56.3 mm; E:22 mm;
Komatsu Tooth pedestal "	Static load, C0:92 kN; B:23 mm; Characteristic cage frequency, FTF:0.42 Hz; Min operating temperature, Tmin:-40 °C; Fatigue limit load, Cu:8.65 kN; D:72 mm; Max operating temperature, Tmax:200 °C; Y2:3.29; Nlim:12,000 rpm; rs min:1.1 mm;
Komatsu Tooth pedestal "	Designation of housing:FL212-; d:61.91 mm; G:M6x1; L:140 mm; A:48 mm; H:250 mm; S:12 mm; Designation of bearing:ES212-39G2; N:23mm; e:29 mm;
Komatsu Tooth pedestal "791-109-1940 Tooth pedestal	Designation of housing:FL212-; d:61.91 mm; G:M6x1; L:140 mm; A:48 mm; H:250 mm; S:12 mm; Designation of bearing:ES212-39G2; N:23mm; e:29 mm;