Komatsu Tooth pedestal "	Dimension P:1.3 in; Dimension H:5.1 in; Bolt Size:4 x M30; Dimension R:20.6 in; Shaft Size:7 in; Seal Type:Felt Seal; Dimension T:23.5 in; Bearing Type:Split Cylindrical Re; Bearing UPC:013992033086; Cr - Dynamic Load Rating:208398 lbf;
Komatsu Tooth pedestal "209-01-78330 Tooth pedestal	S:19 mm; Designation of bearing:UC308-24G2T20; C:40.56 kN; SW:4.76 mm; Designation of housing:C308-; H:120 mm; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; s1:26 mm; A3:3 mm;
Komatsu Tooth pedestal "21N-70-14140 Tooth pedestal	T max.:100 °C; A1:30 mm; C0:18.2 kN; d:38.1 mm; A:54 mm; s1:39.7 mm; H:49.2 mm; Designation of housing:PG208-; B1:56.3 mm; E:22 mm;
Komatsu Tooth pedestal "	Diameter series symbol:Used for Light load; d:65; Unit, Type:Insert Bearing Unit; Fit:J7; Pillow Type, Category:Standard; Bearing Inner Dia. Shape:Cylindrical Bore Set; B:76.2; Stroke:No; Bearing Unit, Type:Pillow Type; Rolling Element Material:Bearing Steel;
Komatsu Tooth pedestal "	Designation of housing:FL212-; d:61.91 mm; G:M6x1; L:140 mm; A:48 mm; H:250 mm; S:12 mm; Designation of bearing:ES212-39G2; N:23mm; e:29 mm;
Komatsu Tooth pedestal "	Grease Lubrication - T Seal:1600 rpm; Dimension F:9.76 in; Pre Install Clearance Min:0.0043 in; Y2 - Geometry Factor:3.80; e - Geometry Factor:0.26; Oil Lubrication - M/N Seal:1200 rpm; Engineering Group:Mounted Bearing; Dimension G:1.25 in; Int Radial Clearance Reduction Max:0.0025 in; Shaft Size  :3-1/2 in;
Komatsu Tooth pedestal "	Tensioning Unit Type:Tension Type; Dimension N:16.5 in; Cor - Static Load Rating:133087 lbf; Bearing UPC:013992033482; Bearing Type:Split Cylindrical Re; Cr - Dynamic Load Rating:102063 lbf; Dimension P:1.0 in; Dimension S:3.0 in; Ca - Axial Load Rating:7014 lbf; Dimension T:20.0 in;
Komatsu Tooth pedestal "142-70-12240 Tooth pedestal	S:19 mm; Designation of bearing:UC308-24G2T20; C:40.56 kN; SW:4.76 mm; Designation of housing:C308-; H:120 mm; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; s1:26 mm; A3:3 mm;