Komatsu Tooth pedestal "799-601-7200 Tooth pedestal	Designation of bearing:EX205-14G2L4; L:115 mm; d:22.22 mm; Recommended tightening torque for set screw:3.7 Nm; C:14 kN; B:34.8 mm; Designation of housing:FC205-; N:12mm; G:M6x1; C0:7.88 kN;
Komatsu Tooth pedestal "6165-71-3130 Tooth pedestal	T max.:100 °C; A1:30 mm; C0:18.2 kN; d:38.1 mm; A:54 mm; s1:39.7 mm; H:49.2 mm; Designation of housing:PG208-; B1:56.3 mm; E:22 mm;
Komatsu Tooth pedestal "	Housing Material:304 Stainless Steel; RoHS:6; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Type:Bearings with Housin; Shape:Flange Type; Bearing I.D. d(mm):17; Flange O.D. H(φ):60; Days to Ship:8 Days;
Komatsu Tooth pedestal "	G:R1/8"; Designation of housing:FLE206N-; Designation of open end cover:SCOU206-20; Z:46.3 mm; s1:19.05 mm; Recommended tightening torque for set screw:3.7 Nm; T min.:-20 °C; B:38.1 mm; C:19.5 kN; Designation of bearing:UC206-20G2L4;
Komatsu Tooth pedestal "	Grease Lubrication - T Seal:1600 rpm; Dimension F:9.76 in; Pre Install Clearance Min:0.0043 in; Y2 - Geometry Factor:3.80; e - Geometry Factor:0.26; Oil Lubrication - M/N Seal:1200 rpm; Engineering Group:Mounted Bearing; Dimension G:1.25 in; Int Radial Clearance Reduction Max:0.0025 in; Shaft Size  :3-1/2 in;
Komatsu Tooth pedestal "799-404-2910 Tooth pedestal	Series:6300; Cup Part Number:6325; Da - Cup Frontface Backing Diameter:5.00 in; Cg - Geometry Factor:0.0827; Y - ISO Factor3:1.85; D:5.3150 in; r - Cup Backface To Clear Radius1:0.12 in; Design Units:Imperial; Db - Cup Backface Backing Diameter:4.61 in; e - ISO Factor2:0.32;
Komatsu Tooth pedestal "791-630-3250 Tooth pedestal	Tensioning Unit Type:Tension Type; Dimension N:16.5 in; Cor - Static Load Rating:133087 lbf; Bearing UPC:013992033482; Bearing Type:Split Cylindrical Re; Cr - Dynamic Load Rating:102063 lbf; Dimension P:1.0 in; Dimension S:3.0 in; Ca - Axial Load Rating:7014 lbf; Dimension T:20.0 in;
Komatsu Tooth pedestal "799-601-9110 Tooth pedestal	Static load, C0:92 kN; B:23 mm; Characteristic cage frequency, FTF:0.42 Hz; Min operating temperature, Tmin:-40 °C; Fatigue limit load, Cu:8.65 kN; D:72 mm; Max operating temperature, Tmax:200 °C; Y2:3.29; Nlim:12,000 rpm; rs min:1.1 mm;