Komatsu CABLE 20U-Y14-3913 CABLE	s1:22.65 mm; C:43.55 kN; N:18mm; H:222 mm; e:28 mm; A1:15 mm; B:45.3 mm; S:11.8 mm; J:184 mm; A2:61.5 mm;
Komatsu CABLE 8295-06-1472 CABLE	Designation of housing:P216-; A:78 mm; Recommended tightening torque for set screw:33 Nm; S:37.3 mm; H:88.9 mm; d1:110 mm; d:80 mm; N1:31 mm; A1:51 mm; Weight:9.32 kg;
Komatsu CABLE 196-06-25122 CABLE	Limiting Speed (Oil):25680 rpm; da - Inner Ring Backing Diameter:79.800 mm; Cage Type:CR - Phenolic Inner; Da - Outer Ring Backing Diameter:126.800 mm; Design Units:METRIC; Ball Type:Ceramic; D:140 mm; d:65 mm; Bearing Weight:2.046 Kg; do - Ball Diameter:23.81250 mm;
Komatsu CABLE 22U-06-82730 CABLE	s1:22.65 mm; C:43.55 kN; N:18mm; H:222 mm; e:28 mm; A1:15 mm; B:45.3 mm; S:11.8 mm; J:184 mm; A2:61.5 mm;
Komatsu CABLE 21T-06-35142 CABLE	Long Description:95MM Bore; 170MM Out; Inner Race Width:0 Inch | 0 Millimete; Weight / Kilogram:2.582; Outside Diameter:6.693 Inch | 170 Mil; Characteristic outer ring frequency, BPF0:4.1 Hz; Precision Class:ABEC 1 | ISO P0; rs min:2.1 mm; Nlim (grease):3,700 rpm; Max operating temperature, Tmax:120 °C; Radial clearance class:CN;
Komatsu CABLE 7835-33-8300 CABLE	Long Description:95MM Bore; 170MM Out; Inner Race Width:0 Inch | 0 Millimete; Weight / Kilogram:2.582; Outside Diameter:6.693 Inch | 170 Mil; Characteristic outer ring frequency, BPF0:4.1 Hz; Precision Class:ABEC 1 | ISO P0; rs min:2.1 mm; Nlim (grease):3,700 rpm; Max operating temperature, Tmax:120 °C; Radial clearance class:CN;
Komatsu CABLE 14X-43-23352 CABLE	Ca90 - Dynamic Thrust Rating (90 million revolutions)7:8030 lbf; d:1.9060 in; db - Cone Backface Backing Diameter:2.48 in; K - Factor8:1.07; B - Cone Width:1.1563 in; C90 - Dynamic Radial Rating (90 million revolutions)5:8590 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:15000 lbf; Ab - Cage-Cone Frontface Clearance:0.14 in; R - Cone Backface To Clear Radius3:0.09 in; Cg - Geometry Factor:0.102;
Komatsu CABLE 234-A45-1110 CABLE	Seals:VV (Non-Contact Rubb; Flange O.D. H(φ):96; Type:Bearings with Housin; Holder Surface Treatment:Black Oxide Coating; Flange Shape:Compact Type; Shape:Flange Type; Housing Material:1045 Carbon Steel; Bearing I.D. d(mm):30; Width T(mm):45 ～ 80; Bearing Used:Deep Groove Ball Bea;