Komatsu CABLE 56B-84-3B590 CABLE	Ca90 - Dynamic Thrust Rating (90 million revolutions)7:8030 lbf; d:1.9060 in; db - Cone Backface Backing Diameter:2.48 in; K - Factor8:1.07; B - Cone Width:1.1563 in; C90 - Dynamic Radial Rating (90 million revolutions)5:8590 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:15000 lbf; Ab - Cage-Cone Frontface Clearance:0.14 in; R - Cone Backface To Clear Radius3:0.09 in; Cg - Geometry Factor:0.102;
Komatsu CABLE 08028-GE350 CABLE	Limiting Speed (Oil):25680 rpm; da - Inner Ring Backing Diameter:79.800 mm; Cage Type:CR - Phenolic Inner; Da - Outer Ring Backing Diameter:126.800 mm; Design Units:METRIC; Ball Type:Ceramic; D:140 mm; d:65 mm; Bearing Weight:2.046 Kg; do - Ball Diameter:23.81250 mm;
Komatsu CABLE 22U-06-31551 CABLE	Type:Angular Contact Ball; I.D.(Ø):75; Material Symbol:G; Preload:Normal preload; Contact angle(Degree):30; Size Standards:Metric System; Clearance sign:CN (standard); Type symbol:No; Combination symbol:No; Symbol of contact angle:A;
Komatsu CABLE 195-06-77761 CABLE	Long Description:95MM Bore; 170MM Out; Inner Race Width:0 Inch | 0 Millimete; Weight / Kilogram:2.582; Outside Diameter:6.693 Inch | 170 Mil; Characteristic outer ring frequency, BPF0:4.1 Hz; Precision Class:ABEC 1 | ISO P0; rs min:2.1 mm; Nlim (grease):3,700 rpm; Max operating temperature, Tmax:120 °C; Radial clearance class:CN;
Komatsu CABLE 12Y-06-28461 CABLE	S:44 mm; G:M18x1,5; SW:9 mm; m:18 mm; C0:155 kN; r:3; Weight:12.2 kg; T max.:100 °C; B:112 mm; d:105 mm;
Komatsu CABLE 21J-43-13192 CABLE	Flange O.D. H(φ):50; Number of Bearings:Double; Seals:DD (Contact Rubber S; Housing Material:[Aluminum Alloy] 201; Type:Bearings with Housin; Bearing Retained:No; Bearing I.D. d(mm):12; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type;
Komatsu CABLE 8211-06-4340 CABLE	Designation of housing:P216-; A:78 mm; Recommended tightening torque for set screw:33 Nm; S:37.3 mm; H:88.9 mm; d1:110 mm; d:80 mm; N1:31 mm; A1:51 mm; Weight:9.32 kg;
Komatsu CABLE 22P-06-21991 CABLE	Designation of housing:P216-; A:78 mm; Recommended tightening torque for set screw:33 Nm; S:37.3 mm; H:88.9 mm; d1:110 mm; d:80 mm; N1:31 mm; A1:51 mm; Weight:9.32 kg;