Komatsu Reticulation 201-03-71280 Reticulation 21N-03-11441 Reticulation	H2:94 mm; B:42.9 mm; A1:31 mm; Designation of housing:P207N-; Recommended tightening torque for set screw:11.5 Nm; Designation of open end cover:SCO207-35; s1:21.45 mm; T min.:-40 °C; T max.:100 °C; H:47.6 mm;
Komatsu Reticulation 427-03-12620 Reticulation 195-03-17150 Reticulation	B2:1.835 in; Tolerance1:-0.003 in; SNW/SNP Assembly Weight:0.79 lb; Bearing Number:22211K; Taper:1:12; Sleeve:S-11 x 2; S:0.563 in; Diameter d :2 in; D1:2.974 in; Series:222K;
Komatsu Reticulation 234-03-41130 Reticulation 195-03-18841 Reticulation	Lockwasher:MB19; Shaft Diameter d:3 1/4 in; Max Oil Speed:3000; Cage Type:EJ; Jmin:344 mm; Max Grease Speed:2600; H2:45.0 mm; L:410.00 mm; A1:120 mm; Housing:SNT 522-619;
Komatsu Reticulation 22B-54-13650 Reticulation 134-54-61241 Reticulation	Characteristic outer ring frequency, BPF0:11.42 Hz; Axial rigidity:114 N/µm; da min:44.5 mm; r1s min:0.3 mm; Precision class:P4S; Characteristic cage frequency, FTF:0.46 Hz; D2:57.41 mm; Axial displacement K Factor:0.69; Mass:0.11 kg; rs min:0.6 mm;
Komatsu Reticulation 145-03-51180 Reticulation 203-03-56580 Reticulation	Designation of bearing:UC211-34G2L3; B:55.6 mm; C0:29.2 kN; S:22.2 mm; d:53.98 mm; Recommended tightening torque for set screw:16.8 Nm; s1:27.8 mm; Weight:1.17 kg; T max.:100 °C; A2:33.4 mm;
Komatsu Reticulation 175-862-5610 Reticulation 21P-03-K2161 Reticulation	N2:32 mm; d1:32.4 mm; L3:51 mm; d:20 mm; L2:10 mm; C:12.8 kN; A2:21 mm; L1:61 mm; H:89 mm; Designation of housing:T204N-;
Komatsu Reticulation 22M-03-11920 Reticulation 20T-03-71132 Reticulation	Grease Lubrication - B/C/O Seal:1000 rpm; Dimension H:1.28 in; Oil Lubrication - T Seal:2400 rpm; Dimension N:3.400 in; Eng Internal Radial Clearance - Max:0.0039; Dimension K:1.44 in; Grease Lubrication - T Seal:2000 rpm; UPC Code:0883450071628; Bearing Number:22218; Y2 - Geometry Factor:4.31;
Komatsu Reticulation 207-03-31251 Reticulation 22U-03-11141 Reticulation	H2:94 mm; B:42.9 mm; A1:31 mm; Designation of housing:P207N-; Recommended tightening torque for set screw:11.5 Nm; Designation of open end cover:SCO207-35; s1:21.45 mm; T min.:-40 °C; T max.:100 °C; H:47.6 mm;