Komatsu A scraper bucket 19M-03-11581 CUSHION	B - Double Cone Width:5.5000 in; Db - Cup Backface Backing Diameter:15.63 in; C - Cup Width:2.3750 in; R - Cone Frontface To Clear Radius1:0.140 in; da - Cone Frontface Backing Diameter:10.94 in; Y1 - ISO Factor9:2.03; d:9.8750 in; Bearing Weight:185.60 lb; Cage Type:Stamped Steel; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:152000 lbf;
Komatsu A scraper bucket "	Characteristic cage frequency, FTF:0.42 Hz; Nref:2,100 rpm; Characteristic rolling element frequency, BSF:6.24 Hz; Radial clearance class:C3; Fatigue limit load, Cu:72.4 kN; Mass:11.28 kg; Y0:2.04; d:120 mm; Y1:2.09; Nlim:2,800 rpm;
Komatsu A scraper bucket "707-G1-X3550KZ A scraper bucket	Number of Bearings:Double; Bearing I.D. d(mm):20; Shape:Flanged Pilot Type; Bearing Part Number:6004; Housing Material:304 Stainless Steel; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Holder Surface Treatment:Not Provided; Volume Discount:Available; Width T(mm):70;
Komatsu A scraper bucket 195-57-21410 CUSHION	Set Screw Size:M8 x 1.25; Lubrication Type:Relubricatable; Bore Type:Cylindrical bore; Angle between Set Screws:90 º; Dynamic Load Rating:6400 lbf; O.D. Type:Spherical OD; Radius r:0.6 mm; Weight:0.50 lb; Sub Series:GYM..KRRB; Outside Diameter D:2.835 in;
Komatsu A scraper bucket 144-862-4340 CUSHION	r:1.1; B1:49.3 mm; T min.:-40 °C; d1:82 mm; C1:8 mm; Weight:1.2 kg; B2:22.3 mm; C:24 mm; SW:5 mm; S:12 mm;
Komatsu A scraper bucket "	Set Screw Size:M8 x 1.25; Lubrication Type:Relubricatable; Bore Type:Cylindrical bore; Angle between Set Screws:90 º; Dynamic Load Rating:6400 lbf; O.D. Type:Spherical OD; Radius r:0.6 mm; Weight:0.50 lb; Sub Series:GYM..KRRB; Outside Diameter D:2.835 in;
Komatsu A scraper bucket 417-57-41130 CUSHION	r:1.1; B1:49.3 mm; T min.:-40 °C; d1:82 mm; C1:8 mm; Weight:1.2 kg; B2:22.3 mm; C:24 mm; SW:5 mm; S:12 mm;
Komatsu A scraper bucket 208-871-3170 CUSHION	Days to Ship:8 Days; Thickness T(mm):25 ～ 40; Number of Bearings:Double; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Seals:VV (Non-Contact Rubb; Thickness, Height Indication:T, h Selection; Holder Surface Treatment:Clear Anodize;