| Komatsu A scraper bucket " | Characteristic cage frequency, FTF:0.42 Hz; Nref:2,100 rpm; Characteristic rolling element frequency, BSF:6.24 Hz; Radial clearance class:C3; Fatigue limit load, Cu:72.4 kN; Mass:11.28 kg; Y0:2.04; d:120 mm; Y1:2.09; Nlim:2,800 rpm; |
| Komatsu A scraper bucket 20U-04-41211 CUSHION | Bearing Part Number:6000; Volume Discount:Available; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Black Oxide Coating; Number of Bearings:Double; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Flange O.D. H(φ):50; |
| Komatsu A scraper bucket " | T max.:200 °C; A4:28.5 mm; A2:42.4 mm; Weight:0.45 kg; d:20 mm; J:90 mm; G:R1/8"; S:7.5 mm; s1:24.2 mm; C:12.8 kN; |
| Komatsu A scraper bucket " | Characteristic cage frequency, FTF:0.42 Hz; Nref:2,100 rpm; Characteristic rolling element frequency, BSF:6.24 Hz; Radial clearance class:C3; Fatigue limit load, Cu:72.4 kN; Mass:11.28 kg; Y0:2.04; d:120 mm; Y1:2.09; Nlim:2,800 rpm; |
| Komatsu A scraper bucket X212206840ST CUSHION | Y - ISO Factor3:1.26; r - Cup Backface To Clear Radius1:0.130 in; D:11.0236 in; Design Units:Imperial; Cg - Geometry Factor:0.131; C - Cup Width:1.4173 in; Db - Cup Backface Backing Diameter:9.92 in; e - ISO Factor2:0.48; Da - Cup Frontface Backing Diameter:10.25 in; Cup Part Number:67830; |
| Komatsu A scraper bucket 21T-43-71162 CUSHION | B - Double Cone Width:5.5000 in; Db - Cup Backface Backing Diameter:15.63 in; C - Cup Width:2.3750 in; R - Cone Frontface To Clear Radius1:0.140 in; da - Cone Frontface Backing Diameter:10.94 in; Y1 - ISO Factor9:2.03; d:9.8750 in; Bearing Weight:185.60 lb; Cage Type:Stamped Steel; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:152000 lbf; |
| Komatsu A scraper bucket 21T-54-36472 CUSHION | RoHS:6; Seal:Silicone; Unit Body Material:Cast Iron; Fit:J7; Basic Load Rating, Dynamic Rating(N):34100; Pillow Type, Category:Standard; d:40; Rolling Element Material:Bearing Steel; Surface Treatment:No; |
| Komatsu A scraper bucket 12Y-54-26430 STRIKER | r:1.1; B1:49.3 mm; T min.:-40 °C; d1:82 mm; C1:8 mm; Weight:1.2 kg; B2:22.3 mm; C:24 mm; SW:5 mm; S:12 mm; |