Komatsu HAND RAIL 21T-919-4910 HAND RAIL | e:0.3; B:25.65 mm; Fatigue limit load, Cu:11 kN; Y2:1.98; d:38.1 mm; C:19.05 mm; Characteristic cage frequency, FTF:0.42 Hz; Min operating temperature, Tmin:-40 °C; Characteristic inner ring frequency, BPFI:9.79 Hz; r1a max:3.3 mm; |
Komatsu HAND RAIL 8255-54-1540 HAND RAIL | Series:Industrial; Foot Height H1:20.6 mm; Bearing Type:Ball Bearing; Bolt Hole Length N1:23.8 mm; Dimension B1:2.220 in; Base to Center Height H:60.33 mm; Inside Ring Width B:=Bearings1_Inside Ri; Total Width A:2.374 in; Weight:6.755 lb; Center of Bearing from End S:21.5 mm; |
Komatsu HAND RAIL 21T-919-5630 HAND RAIL | Category:Bearings; da max:77 mm; Characteristic cage frequency, FTF:0.42 Hz; Minimum Buy Quantity:N/A; Da max:112 mm; Dynamic load, C:108 kN; dc min:87 mm; d:65 mm; r1s min:1.5 mm; Min operating temperature, Tmin:-20 °C; |
Komatsu HAND RAIL 423-Z94-3640 HAND RAIL | e:0.3; B:25.65 mm; Fatigue limit load, Cu:11 kN; Y2:1.98; d:38.1 mm; C:19.05 mm; Characteristic cage frequency, FTF:0.42 Hz; Min operating temperature, Tmin:-40 °C; Characteristic inner ring frequency, BPFI:9.79 Hz; r1a max:3.3 mm; |
Komatsu HAND RAIL 21T-54-78160 HAND RAIL | Bearing I.D. d(mm):6; Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Bearing Material:[Steel] Steel; Holder Surface Treatment:Clear Anodize; Bearing Retained:Yes (with retaining; Width T(mm):12; Number of Bearings:Single; |
Komatsu HAND RAIL 21T-54-75422 HAND RAIL | A1:22 mm; Weight:0.97 kg; B1:43.5 mm; A:40 mm; B:34 mm; C:12.8 kN; N:13mm; G:M6x1; S:17 mm; H1:15 mm; |
Komatsu HAND RAIL 21N-54-32191 HAND RAIL | Series:Industrial; Foot Height H1:20.6 mm; Bearing Type:Ball Bearing; Bolt Hole Length N1:23.8 mm; Dimension B1:2.220 in; Base to Center Height H:60.33 mm; Inside Ring Width B:=Bearings1_Inside Ri; Total Width A:2.374 in; Weight:6.755 lb; Center of Bearing from End S:21.5 mm; |
Komatsu HAND RAIL 56B-54-27212 HAND RAIL | Design Units:METRIC; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:65300 lbf; Cone Part Number:X33113; DD:92.3 mm; Ab - Cage-Cone Frontface Clearance:3 mm; d:65.000 mm; R - Cone Backface To Clear Radius3:1.520 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:28700 N; G2 - Heat Generation Factor (Rib-Roller End):24.5; |