Komatsu HAND RAIL 425-54-42681 HAND RAIL	Weight:0.50 lb; Dynamic Load Rating:10800 lbf; Dimension S1:36.41 mm; Dimension B2:0.811 in; Shaft Size d:2 1/16 in; Set Screw Size:7/16-14; Static Load Rating:6570 lbf; Radius r:0.6 mm; O.D. Type:Spherical OD; Outside Ring Width C:24.000 mm;
Komatsu HAND RAIL 206-54-81931 HAND RAIL	Bearing I.D. d(mm):6; Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Bearing Material:[Steel] Steel; Holder Surface Treatment:Clear Anodize; Bearing Retained:Yes (with retaining; Width T(mm):12; Number of Bearings:Single;
Komatsu HAND RAIL 21N-818-1130 HAND RAIL	Bearing I.D. d(mm):6; Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Bearing Material:[Steel] Steel; Holder Surface Treatment:Clear Anodize; Bearing Retained:Yes (with retaining; Width T(mm):12; Number of Bearings:Single;
Komatsu HAND RAIL 421-Z94-3611 HAND RAIL	Internal Clearance:Special; Outer Race Width:0.591 Inch | 15 Mill; Dynamic load, C:14 kN; Noun:Bearing; da max:32 mm; Precision Class:ABEC 1 | ISO P0; Rolling Element:Ball Bearing; rs min:1 mm; B:15 mm; Min operating temperature, Tmin:-10 °C;
Komatsu HAND RAIL 208-54-82220 HAND RAIL	Weight:0.50 lb; Dynamic Load Rating:10800 lbf; Dimension S1:36.41 mm; Dimension B2:0.811 in; Shaft Size d:2 1/16 in; Set Screw Size:7/16-14; Static Load Rating:6570 lbf; Radius r:0.6 mm; O.D. Type:Spherical OD; Outside Ring Width C:24.000 mm;
Komatsu HAND RAIL 21T-54-77430 HAND RAIL	T min.:-40 °C; H:63.5 mm; Recommended tightening torque for set screw:16.8 Nm; G:M6x1; L:140 mm; A:66 mm; Weight:3.46 kg; N:M16; S:27.7 mm; B:55.4 mm;
Komatsu HAND RAIL 21T-54-78350 HAND RAIL	Series:Industrial; Foot Height H1:20.6 mm; Bearing Type:Ball Bearing; Bolt Hole Length N1:23.8 mm; Dimension B1:2.220 in; Base to Center Height H:60.33 mm; Inside Ring Width B:=Bearings1_Inside Ri; Total Width A:2.374 in; Weight:6.755 lb; Center of Bearing from End S:21.5 mm;
Komatsu HAND RAIL 42C-46-15323 HAND RAIL	C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:130000 lbf; da - Cone Frontface Backing Diameter:8.67 in; Cone Part Number:350700; Cg - Geometry Factor:0.157; C1 - Dynamic Radial Rating (1 million revolutions)6:289000 lbf; G2 - Heat Generation Factor (Rib-Roller End):77.3; d:7.0000 in; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:0.89 in; Cage Type:Pin-Type;