Komatsu HAND RAIL 21N-54-41741 HAND RAIL	Series:Industrial; Foot Height H1:20.6 mm; Bearing Type:Ball Bearing; Bolt Hole Length N1:23.8 mm; Dimension B1:2.220 in; Base to Center Height H:60.33 mm; Inside Ring Width B:=Bearings1_Inside Ri; Total Width A:2.374 in; Weight:6.755 lb; Center of Bearing from End S:21.5 mm;
Komatsu HAND RAIL 3FE-53-19390UCKF 9HAND RAIL	Category:Bearings; da max:77 mm; Characteristic cage frequency, FTF:0.42 Hz; Minimum Buy Quantity:N/A; Da max:112 mm; Dynamic load, C:108 kN; dc min:87 mm; d:65 mm; r1s min:1.5 mm; Min operating temperature, Tmin:-20 °C;
Komatsu HAND RAIL 21N-818-2840 HAND RAIL	Internal Clearance:Special; Outer Race Width:0.591 Inch | 15 Mill; Dynamic load, C:14 kN; Noun:Bearing; da max:32 mm; Precision Class:ABEC 1 | ISO P0; Rolling Element:Ball Bearing; rs min:1 mm; B:15 mm; Min operating temperature, Tmin:-10 °C;
Komatsu HAND RAIL 198-54-79211 HAND RAIL	C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:130000 lbf; da - Cone Frontface Backing Diameter:8.67 in; Cone Part Number:350700; Cg - Geometry Factor:0.157; C1 - Dynamic Radial Rating (1 million revolutions)6:289000 lbf; G2 - Heat Generation Factor (Rib-Roller End):77.3; d:7.0000 in; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:0.89 in; Cage Type:Pin-Type;
Komatsu HAND RAIL 8234-54-1561 HAND RAIL	A1:22 mm; Weight:0.97 kg; B1:43.5 mm; A:40 mm; B:34 mm; C:12.8 kN; N:13mm; G:M6x1; S:17 mm; H1:15 mm;
Komatsu HAND RAIL 8255-54-4841 HAND RAIL	Housing Material:[Aluminum Alloy] 201; Bearing I.D. d(mm):8; Type:Bearings with Housin; RoHS:6; Volume Discount:Available; Shape:Flange Type; Bearing Part Number:608; Flange Shape:Compact Type; Number of Bearings:Single;
Komatsu HAND RAIL 423-54-45140 HAND RAIL	Internal Clearance:Special; Outer Race Width:0.591 Inch | 15 Mill; Dynamic load, C:14 kN; Noun:Bearing; da max:32 mm; Precision Class:ABEC 1 | ISO P0; Rolling Element:Ball Bearing; rs min:1 mm; B:15 mm; Min operating temperature, Tmin:-10 °C;
Komatsu HAND RAIL 567-54-71741 HAND RAIL	Bearing I.D. d(mm):6; Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Bearing Material:[Steel] Steel; Holder Surface Treatment:Clear Anodize; Bearing Retained:Yes (with retaining; Width T(mm):12; Number of Bearings:Single;