Komatsu HAND RAIL 421-54-45170 HAND RAIL	T min.:-40 °C; H:63.5 mm; Recommended tightening torque for set screw:16.8 Nm; G:M6x1; L:140 mm; A:66 mm; Weight:3.46 kg; N:M16; S:27.7 mm; B:55.4 mm;
Komatsu HAND RAIL 8264-54-1110 HAND RAIL	e:0.3; B:25.65 mm; Fatigue limit load, Cu:11 kN; Y2:1.98; d:38.1 mm; C:19.05 mm; Characteristic cage frequency, FTF:0.42 Hz; Min operating temperature, Tmin:-40 °C; Characteristic inner ring frequency, BPFI:9.79 Hz; r1a max:3.3 mm;
Komatsu HAND RAIL 424-54-25211 HAND RAIL	A1:22 mm; Weight:0.97 kg; B1:43.5 mm; A:40 mm; B:34 mm; C:12.8 kN; N:13mm; G:M6x1; S:17 mm; H1:15 mm;
Komatsu HAND RAIL 20Y-54-31640 HAND RAIL	Design Units:METRIC; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:65300 lbf; Cone Part Number:X33113; DD:92.3 mm; Ab - Cage-Cone Frontface Clearance:3 mm; d:65.000 mm; R - Cone Backface To Clear Radius3:1.520 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:28700 N; G2 - Heat Generation Factor (Rib-Roller End):24.5;
Komatsu HAND RAIL 421-Z94-3621 HAND RAIL	Series:Industrial; Foot Height H1:20.6 mm; Bearing Type:Ball Bearing; Bolt Hole Length N1:23.8 mm; Dimension B1:2.220 in; Base to Center Height H:60.33 mm; Inside Ring Width B:=Bearings1_Inside Ri; Total Width A:2.374 in; Weight:6.755 lb; Center of Bearing from End S:21.5 mm;
Komatsu HAND RAIL 21W-46-48330 HAND RAIL	Internal Clearance:Special; Outer Race Width:0.591 Inch | 15 Mill; Dynamic load, C:14 kN; Noun:Bearing; da max:32 mm; Precision Class:ABEC 1 | ISO P0; Rolling Element:Ball Bearing; rs min:1 mm; B:15 mm; Min operating temperature, Tmin:-10 °C;
Komatsu HAND RAIL 22P-54-11721 HAND RAIL	Days to Ship:7 Days; Bearing Retained:No; Bearing I.D. d(mm):15; Bearing Part Number:6002; RoHS:6; Housing Material:1045 Carbon Steel; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P; Shape:Flange Type;
Komatsu HAND RAIL 41E-54-14352 HAND RAIL	C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:130000 lbf; da - Cone Frontface Backing Diameter:8.67 in; Cone Part Number:350700; Cg - Geometry Factor:0.157; C1 - Dynamic Radial Rating (1 million revolutions)6:289000 lbf; G2 - Heat Generation Factor (Rib-Roller End):77.3; d:7.0000 in; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:0.89 in; Cage Type:Pin-Type;