Komatsu HAND RAIL 8293-54-3431 HAND RAIL	A1:22 mm; Weight:0.97 kg; B1:43.5 mm; A:40 mm; B:34 mm; C:12.8 kN; N:13mm; G:M6x1; S:17 mm; H1:15 mm;
Komatsu HAND RAIL 21T-919-4760 HAND RAIL	C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:130000 lbf; da - Cone Frontface Backing Diameter:8.67 in; Cone Part Number:350700; Cg - Geometry Factor:0.157; C1 - Dynamic Radial Rating (1 million revolutions)6:289000 lbf; G2 - Heat Generation Factor (Rib-Roller End):77.3; d:7.0000 in; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:0.89 in; Cage Type:Pin-Type;
Komatsu HAND RAIL 208-54-82270 HAND RAIL	Housing Material:[Aluminum Alloy] 201; Bearing I.D. d(mm):8; Type:Bearings with Housin; RoHS:6; Volume Discount:Available; Shape:Flange Type; Bearing Part Number:608; Flange Shape:Compact Type; Number of Bearings:Single;
Komatsu HAND RAIL 8211-54-4141 HAND RAIL	T min.:-40 °C; H:63.5 mm; Recommended tightening torque for set screw:16.8 Nm; G:M6x1; L:140 mm; A:66 mm; Weight:3.46 kg; N:M16; S:27.7 mm; B:55.4 mm;
Komatsu HAND RAIL 207-53-83260 HAND RAIL	Weight:0.50 lb; Dynamic Load Rating:10800 lbf; Dimension S1:36.41 mm; Dimension B2:0.811 in; Shaft Size d:2 1/16 in; Set Screw Size:7/16-14; Static Load Rating:6570 lbf; Radius r:0.6 mm; O.D. Type:Spherical OD; Outside Ring Width C:24.000 mm;
Komatsu HAND RAIL 8287-54-5761 HAND RAIL	Series:Industrial; Foot Height H1:20.6 mm; Bearing Type:Ball Bearing; Bolt Hole Length N1:23.8 mm; Dimension B1:2.220 in; Base to Center Height H:60.33 mm; Inside Ring Width B:=Bearings1_Inside Ri; Total Width A:2.374 in; Weight:6.755 lb; Center of Bearing from End S:21.5 mm;
Komatsu HAND RAIL 8233-54-3631 HAND RAIL	Category:Bearings; da max:77 mm; Characteristic cage frequency, FTF:0.42 Hz; Minimum Buy Quantity:N/A; Da max:112 mm; Dynamic load, C:108 kN; dc min:87 mm; d:65 mm; r1s min:1.5 mm; Min operating temperature, Tmin:-20 °C;
Komatsu HAND RAIL 21T-919-5530 HAND RAIL	Internal Clearance:Special; Outer Race Width:0.591 Inch | 15 Mill; Dynamic load, C:14 kN; Noun:Bearing; da max:32 mm; Precision Class:ABEC 1 | ISO P0; Rolling Element:Ball Bearing; rs min:1 mm; B:15 mm; Min operating temperature, Tmin:-10 °C;