Komatsu HAND RAIL 567-54-71740 HAND RAIL	A1:22 mm; Weight:0.97 kg; B1:43.5 mm; A:40 mm; B:34 mm; C:12.8 kN; N:13mm; G:M6x1; S:17 mm; H1:15 mm;
Komatsu HAND RAIL 203-54-86660 HAND RAIL	Bearing I.D. d(mm):6; Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Bearing Material:[Steel] Steel; Holder Surface Treatment:Clear Anodize; Bearing Retained:Yes (with retaining; Width T(mm):12; Number of Bearings:Single;
Komatsu HAND RAIL 8298-54-2730 HAND RAIL	Design Units:METRIC; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:65300 lbf; Cone Part Number:X33113; DD:92.3 mm; Ab - Cage-Cone Frontface Clearance:3 mm; d:65.000 mm; R - Cone Backface To Clear Radius3:1.520 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:28700 N; G2 - Heat Generation Factor (Rib-Roller End):24.5;
Komatsu HAND RAIL 8288-54-1660 HAND RAIL	R - Cone Frontface To Clear Radius2:0.060 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:42600 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:38200 lbf; db - Cone Backface Backing Diameter:8.74 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:74200 lbf; Series:93000; Ab - Cage-Cone Frontface Clearance:0.21 in; B - Double Cone Width:4.8750 in; G1 - Heat Generation Factor (Roller-Raceway)8:912;
Komatsu HAND RAIL 21W-46-48322 HAND RAIL	A1:22 mm; Weight:0.97 kg; B1:43.5 mm; A:40 mm; B:34 mm; C:12.8 kN; N:13mm; G:M6x1; S:17 mm; H1:15 mm;
Komatsu HAND RAIL 22U-54-24651NU HAND RAIL	T min.:-40 °C; H:63.5 mm; Recommended tightening torque for set screw:16.8 Nm; G:M6x1; L:140 mm; A:66 mm; Weight:3.46 kg; N:M16; S:27.7 mm; B:55.4 mm;
Komatsu HAND RAIL 21T-919-5590 HAND RAIL	Series:Industrial; Foot Height H1:20.6 mm; Bearing Type:Ball Bearing; Bolt Hole Length N1:23.8 mm; Dimension B1:2.220 in; Base to Center Height H:60.33 mm; Inside Ring Width B:=Bearings1_Inside Ri; Total Width A:2.374 in; Weight:6.755 lb; Center of Bearing from End S:21.5 mm;
Komatsu HAND RAIL 8242-54-1360 HAND RAIL	C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:130000 lbf; da - Cone Frontface Backing Diameter:8.67 in; Cone Part Number:350700; Cg - Geometry Factor:0.157; C1 - Dynamic Radial Rating (1 million revolutions)6:289000 lbf; G2 - Heat Generation Factor (Rib-Roller End):77.3; d:7.0000 in; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:0.89 in; Cage Type:Pin-Type;