| Komatsu HAND RAIL 8229-54-2391 HAND RAIL | e:0.3; B:25.65 mm; Fatigue limit load, Cu:11 kN; Y2:1.98; d:38.1 mm; C:19.05 mm; Characteristic cage frequency, FTF:0.42 Hz; Min operating temperature, Tmin:-40 °C; Characteristic inner ring frequency, BPFI:9.79 Hz; r1a max:3.3 mm; |
| Komatsu HAND RAIL 26G-54-11140 HAND RAIL | A1:22 mm; Weight:0.97 kg; B1:43.5 mm; A:40 mm; B:34 mm; C:12.8 kN; N:13mm; G:M6x1; S:17 mm; H1:15 mm; |
| Komatsu HAND RAIL 8255-54-1540 HAND RAIL | Series:Industrial; Foot Height H1:20.6 mm; Bearing Type:Ball Bearing; Bolt Hole Length N1:23.8 mm; Dimension B1:2.220 in; Base to Center Height H:60.33 mm; Inside Ring Width B:=Bearings1_Inside Ri; Total Width A:2.374 in; Weight:6.755 lb; Center of Bearing from End S:21.5 mm; |
| Komatsu HAND RAIL 421-Z94-3611 HAND RAIL | Internal Clearance:Special; Outer Race Width:0.591 Inch | 15 Mill; Dynamic load, C:14 kN; Noun:Bearing; da max:32 mm; Precision Class:ABEC 1 | ISO P0; Rolling Element:Ball Bearing; rs min:1 mm; B:15 mm; Min operating temperature, Tmin:-10 °C; |
| Komatsu HAND RAIL 424-54-25240 HAND RAIL | e:0.3; B:25.65 mm; Fatigue limit load, Cu:11 kN; Y2:1.98; d:38.1 mm; C:19.05 mm; Characteristic cage frequency, FTF:0.42 Hz; Min operating temperature, Tmin:-40 °C; Characteristic inner ring frequency, BPFI:9.79 Hz; r1a max:3.3 mm; |
| Komatsu HAND RAIL 428-54-25330 HAND RAIL | Days to Ship:7 Days; Bearing Retained:No; Bearing I.D. d(mm):15; Bearing Part Number:6002; RoHS:6; Housing Material:1045 Carbon Steel; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P; Shape:Flange Type; |
| Komatsu HAND RAIL 8293-54-3161 HAND RAIL | Bearing I.D. d(mm):6; Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Bearing Material:[Steel] Steel; Holder Surface Treatment:Clear Anodize; Bearing Retained:Yes (with retaining; Width T(mm):12; Number of Bearings:Single; |
| Komatsu HAND RAIL 208-54-65870 HAND RAIL | C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:130000 lbf; da - Cone Frontface Backing Diameter:8.67 in; Cone Part Number:350700; Cg - Geometry Factor:0.157; C1 - Dynamic Radial Rating (1 million revolutions)6:289000 lbf; G2 - Heat Generation Factor (Rib-Roller End):77.3; d:7.0000 in; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:0.89 in; Cage Type:Pin-Type; |