Komatsu HAND RAIL 21T-919-4780 HAND RAIL	Internal Clearance:Special; Outer Race Width:0.591 Inch | 15 Mill; Dynamic load, C:14 kN; Noun:Bearing; da max:32 mm; Precision Class:ABEC 1 | ISO P0; Rolling Element:Ball Bearing; rs min:1 mm; B:15 mm; Min operating temperature, Tmin:-10 °C;
Komatsu HAND RAIL 21T-919-8780 HAND RAIL	Internal Clearance:Special; Outer Race Width:0.591 Inch | 15 Mill; Dynamic load, C:14 kN; Noun:Bearing; da max:32 mm; Precision Class:ABEC 1 | ISO P0; Rolling Element:Ball Bearing; rs min:1 mm; B:15 mm; Min operating temperature, Tmin:-10 °C;
Komatsu HAND RAIL 41K-54-23380 HAND RAIL	Design Units:METRIC; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:65300 lbf; Cone Part Number:X33113; DD:92.3 mm; Ab - Cage-Cone Frontface Clearance:3 mm; d:65.000 mm; R - Cone Backface To Clear Radius3:1.520 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:28700 N; G2 - Heat Generation Factor (Rib-Roller End):24.5;
Komatsu HAND RAIL 8206-54-6161 HAND RAIL	e:0.3; B:25.65 mm; Fatigue limit load, Cu:11 kN; Y2:1.98; d:38.1 mm; C:19.05 mm; Characteristic cage frequency, FTF:0.42 Hz; Min operating temperature, Tmin:-40 °C; Characteristic inner ring frequency, BPFI:9.79 Hz; r1a max:3.3 mm;
Komatsu HAND RAIL 8293-54-1791 HAND RAIL	T min.:-40 °C; H:63.5 mm; Recommended tightening torque for set screw:16.8 Nm; G:M6x1; L:140 mm; A:66 mm; Weight:3.46 kg; N:M16; S:27.7 mm; B:55.4 mm;
Komatsu HAND RAIL 21T-919-5530 HAND RAIL	Internal Clearance:Special; Outer Race Width:0.591 Inch | 15 Mill; Dynamic load, C:14 kN; Noun:Bearing; da max:32 mm; Precision Class:ABEC 1 | ISO P0; Rolling Element:Ball Bearing; rs min:1 mm; B:15 mm; Min operating temperature, Tmin:-10 °C;
Komatsu HAND RAIL 22P-54-11971 HAND RAIL	Weight:0.50 lb; Dynamic Load Rating:10800 lbf; Dimension S1:36.41 mm; Dimension B2:0.811 in; Shaft Size d:2 1/16 in; Set Screw Size:7/16-14; Static Load Rating:6570 lbf; Radius r:0.6 mm; O.D. Type:Spherical OD; Outside Ring Width C:24.000 mm;
Komatsu HAND RAIL 415-54-25130 HAND RAIL	Bearing I.D. d(mm):6; Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Bearing Material:[Steel] Steel; Holder Surface Treatment:Clear Anodize; Bearing Retained:Yes (with retaining; Width T(mm):12; Number of Bearings:Single;