Komatsu Connector 6210-61-6210 Connector	rs min:0.6 mm; Mass:0.07 kg; B:12 mm; Max operating temperature, Tmax:180 °C; Characteristic rolling element frequency, BSF:3.78 Hz; Characteristic outer ring frequency, BPF0:2.63 Hz; Brand:NTN; Dynamic load, C:9.6 kN; Characteristic cage frequency, FTF:0.38 Hz; f0:12.8;
Komatsu Connector 6210-61-6290 Connector	d:57.15 mm; m:12 mm; Recommended tightening torque for set screw:27.1 Nm; B:71 mm; SW:5.56 mm; C:36 mm; D:130 mm; T max.:100 °C; C1:11.3 mm; C0:51.8 kN;
Komatsu Connector 42C-07-13421 Connector	Designation of bearing:UC209G2T04; Dz:95 mm; A:38 mm; Z:56.3 mm; d:45 mm; e:22 mm; A2:52.2 mm; G:M6x1; Recommended tightening torque for set screw:11.5 Nm; J:105 mm;
Komatsu Connector 6162-14-4560 Connector	Designation of bearing:UC209G2T04; Dz:95 mm; A:38 mm; Z:56.3 mm; d:45 mm; e:22 mm; A2:52.2 mm; G:M6x1; Recommended tightening torque for set screw:11.5 Nm; J:105 mm;
Komatsu Connector 569-95-63520 Connector	K - Factor8:2.22; R - Cone Backface To Clear Radius3:0.03 in; C0 - Static Radial Rating:28000 lbf; Cage Type:Stamped Steel; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):9.9; da - Cone Frontface Backing Diameter:1.75 in; C1 - Dynamic Radial Rating (1 million revolutions)6:26000 lbf; a - Effective Center Location4:-0.38 in; Cg - Geometry Factor:0.0731;
Komatsu Connector 6166-11-8880 Connector	Recommended tightening torque for set screw:33 Nm; e:36 mm; T min.:-20 °C; J:178 mm; A:61 mm; C0:68 kN; d:70 mm; Designation of housing:F314-; B:78 mm; G:M10x1;
Komatsu Connector 6166-11-8970 Connector	Bearing Material:[Steel] Steel; RoHS:6; Volume Discount:Available; Bearing Part Number:6207; Width T(mm):90; Seals:VV (Non-Contact Rubb; Flange O.D. H(φ):126; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):35;
Komatsu Connector 23B-06-41861 Connector	d:57.15 mm; m:12 mm; Recommended tightening torque for set screw:27.1 Nm; B:71 mm; SW:5.56 mm; C:36 mm; D:130 mm; T max.:100 °C; C1:11.3 mm; C0:51.8 kN;