Komatsu Connector 6150-61-6520 Connector | Recommended tightening torque for set screw:33 Nm; e:36 mm; T min.:-20 °C; J:178 mm; A:61 mm; C0:68 kN; d:70 mm; Designation of housing:F314-; B:78 mm; G:M10x1; |
Komatsu Connector 6151-81-7920 Connector | J:99 mm; A2:35.9 mm; s1:24.2 mm; T min.:-20 °C; e:12.5 mm; H:124 mm; B:21.4 mm; d1:37.4 mm; A1:11 mm; Designation of bearing:ES205-15G2T20; |
Komatsu Connector 6732-11-5662 Connector | Size Standards:Metric System; Number of Raceway Ring Rows:Double Row; Basic Dynamic Load Rating(N):18200; Inner/Outer Ring Material:Steel; Retainer Type:Punching; Types:Cylindrical Bore; Load Direction:Radial; Type:Self-aligning ball; Max. Allowed rpm(rpm):10000; d:25; |
Komatsu Connector 6166-61-7230 Connector | Recommended tightening torque for set screw:33 Nm; e:36 mm; T min.:-20 °C; J:178 mm; A:61 mm; C0:68 kN; d:70 mm; Designation of housing:F314-; B:78 mm; G:M10x1; |
Komatsu Connector 6215-11-4510 Connector | d:57.15 mm; m:12 mm; Recommended tightening torque for set screw:27.1 Nm; B:71 mm; SW:5.56 mm; C:36 mm; D:130 mm; T max.:100 °C; C1:11.3 mm; C0:51.8 kN; |
Komatsu Connector 790-222-3500 Connector | Size Standards:Metric System; Number of Raceway Ring Rows:Double Row; Basic Dynamic Load Rating(N):18200; Inner/Outer Ring Material:Steel; Retainer Type:Punching; Types:Cylindrical Bore; Load Direction:Radial; Type:Self-aligning ball; Max. Allowed rpm(rpm):10000; d:25; |
Komatsu Connector 6215-51-5720 Connector | Type:Bearings with Housin; Housing Material:1045 Carbon Steel; RoHS:6; Number of Bearings:Double; Bearing I.D. d(mm):6; Bearing Part Number:626; Holder Surface Treatment:Electroless Nickel P; Shape:Bottom Mount; |
Komatsu Connector 6150-61-6861 Connector | r - Cup Frontface To Clear Radius2:0.03 in; db - Cone Backface Backing Diameter:4.02 in; D:6.0000 in; Aa - Cage-Cone Backface Clearance:0.15 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:12600 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:84600 lbf; Ab - Cage-Cone Frontface Clearance:0.09 in; G2 - Heat Generation Factor (Rib-Roller End):36.8; T - Bearing Width across Cones:3.2500 in; |