| Komatsu cable 20T-43-72180 cable | B:49.2 mm; s1:42.9 mm; T min.:-20 °C; A3:2 mm; Designation of housing:C210-; Designation of bearing:EX210-31G2L3; Recommended tightening torque for set screw:8 Nm; B1:62.7 mm; H:120 mm; G:M6x1; |
| Komatsu cable 3EH-37-14210KF cable | r:3.5; d1:146 mm; C0:140 kN; Recommended tightening torque for set screw:120 Nm; d:100 mm; T min.:-20 °C; S:50 mm; B:100 mm; B2:36.5 mm; G:M20x1,5; |
| Komatsu cable 13S-43-15120 cable | G1 - Heat Generation Factor (Roller-Raceway):158; Aa - Cage-Cone Backface Clearance:2.3 mm; Series:JP12000; Cage Type:Stamped Steel; d:120 mm; G2 - Heat Generation Factor (Rib-Roller End):76.7; K - Factor8:1.24; db - Cone Backface Backing Diameter:139 mm; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:76700 lbf; C90 - Dynamic Radial Rating (90 million revolutions)5:50800 N; |
| Komatsu cable 3EG-55-13310KF cable | Type:Bearings with Housin; Shape:Flanged Pilot Type; Bearing Part Number:6906; Seals:VV (Non-Contact Rubb; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Black Oxide Coating; Bearing Retained:No; |
| Komatsu cable 21N-43-11340 cable | C:20 mm; Cb min:5 mm; Nref:5,700 rpm; Max operating temperature, Tmax:120 °C; Nlim:8,400 rpm; ra max:2 mm; Characteristic rolling element frequency, BSF:5.26 Hz; T:25.25 mm; ISO 355 reference:T2FB040; Db min:82 mm; |
| Komatsu cable 144-916-7361 cable | r:3.5; d1:146 mm; C0:140 kN; Recommended tightening torque for set screw:120 Nm; d:100 mm; T min.:-20 °C; S:50 mm; B:100 mm; B2:36.5 mm; G:M20x1,5; |
| Komatsu cable 42A-22-16110 cable | B:18 mm; Static load, C0:29.6 kN; D:120 mm; Mass:0.54 kg; Radial clearance class:CN; da min:91.5 mm; Characteristic cage frequency, FTF:0.45 Hz; Characteristic rolling element frequency, BSF:9.83 Hz; Fatigue limit load, Cu:1.33 kN; f0:16.4; |
| Komatsu cable 195-06-21142 cable | Load Direction:Radial Load; d:60; Basic Dynamic Load Rating Cr(N):52400; Precision:Grade 0; Number of Raceway Ring Rows:Single Row; Inner/Outer Ring Material:440C Stainless Steel; Features:Heat resistant / Ant; Width(mm):22; Bearing Style:Open Type; Outer Ring Shape:Flat; |