Komatsu cable 238-45-19230 cable	Bearing I.D. d(mm):25; Thickness T(mm):61 ～ 80; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Bearing Material:[Steel] Steel; C Chamfered:Not Provided; Lateral Width L(mm):96; RoHS:6; Bearing Used:Deep Groove Ball Bea; Height H(mm):40 ～ 80;
Komatsu cable 12F-961-5150 cable	r:3.5; d1:146 mm; C0:140 kN; Recommended tightening torque for set screw:120 Nm; d:100 mm; T min.:-20 °C; S:50 mm; B:100 mm; B2:36.5 mm; G:M20x1,5;
Komatsu cable 232-06-11121 cable	C:20 mm; Cb min:5 mm; Nref:5,700 rpm; Max operating temperature, Tmax:120 °C; Nlim:8,400 rpm; ra max:2 mm; Characteristic rolling element frequency, BSF:5.26 Hz; T:25.25 mm; ISO 355 reference:T2FB040; Db min:82 mm;
Komatsu cable 08028-43250 cable	Bearing I.D. d(mm):25; Thickness T(mm):61 ～ 80; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Bearing Material:[Steel] Steel; C Chamfered:Not Provided; Lateral Width L(mm):96; RoHS:6; Bearing Used:Deep Groove Ball Bea; Height H(mm):40 ～ 80;
Komatsu cable 8242-06-2340 cable	C:20 mm; Cb min:5 mm; Nref:5,700 rpm; Max operating temperature, Tmax:120 °C; Nlim:8,400 rpm; ra max:2 mm; Characteristic rolling element frequency, BSF:5.26 Hz; T:25.25 mm; ISO 355 reference:T2FB040; Db min:82 mm;
Komatsu cable 7861-92-5910 cable	Engineering Group:Mounted Bearing; Dimension F:16.13 in; Grease Lubrication - T Seal:1200 rpm; Eng Internal Radial Clearance - Min:0.0053; Y1 - Geometry Factor:2.73; Dimension H:1.75 in; UPC Code:0883450076005; Locking Style:Double V-Lock; Dimension E:2.75 in; Dimension J (Bolt Size):0.750 in;
Komatsu cable 111-961-5140 cable	Load Direction:Radial Load; d:60; Basic Dynamic Load Rating Cr(N):52400; Precision:Grade 0; Number of Raceway Ring Rows:Single Row; Inner/Outer Ring Material:440C Stainless Steel; Features:Heat resistant / Ant; Width(mm):22; Bearing Style:Open Type; Outer Ring Shape:Flat;
Komatsu cable 234-A43-3510 cable	r:3.5; d1:146 mm; C0:140 kN; Recommended tightening torque for set screw:120 Nm; d:100 mm; T min.:-20 °C; S:50 mm; B:100 mm; B2:36.5 mm; G:M20x1,5;